what do they do/control? just curious

Merry Christmas!

 

Just for foot well lights.. I wish I could say nitrous

 

I turn a switch and it makes womens panties drop.....its called the ignition

 

I have my V1 remote control unit located just in front of my shifter (to silence the beeps without having to reach around for it). The (blue) foot well lights would be on a switch too, but I have them wired into the overhead light to turn on when I open the door.

I always like the "Go Baby Go" buttons, but without juice I don't see the point of putting one in yet.

 

Pics are from last build.

Little red button on top of Hurst shifter is for transbrake when racing, reverse when not. Little black button was for electronic overdrive, so car could be driven at highways speed without burning up 4r70w. Panel next to shifter is delay box for bracket racing.

New build has 2 speed GM transmission, also with transbrake. Interior has been gutted for rebuild. No longer looks like pics. Switches on top were 2 single KB baps. Car now has return style fuel system with 5 gallon cell in trunk.

 

I installed a toggle switch in my console (next to the 12v accessory plug) that enables my line locks... which are wired to CC thumb switch on the steering wheel.

 

Line lock toggle switch to the right of the shifter. Very clean install.

 

installed push button in glove box for trunk release

 

Same line lock next to shifter...

 

Switches control water pump and fan, linelock power, methanol system power.
LEDs for fuel pump power, power to electric water pump and ic pump, power to fan, high and low speed pcm fan-om signal indicators, methanol engaged and low fluid level warnings, and line lock engaged.

Also have a master line lock pushbutton switch on headlight switch assembly.