Avatar
#2
RE: Avatar
yes, you are correct. There's a specific size for the avatar. The way I reduced mine is by using "microsoft paint" ...if you're using windows Xp or so, you should have it. If so, here's what you do:
-Open the .jpg file using microsoft paint.
- Go to the toolbar above and open "image"
- Go to "stretch/skew"
-Go to "stretch" and play with the "horizaontal" and "vertical" ..let say, instead of 100% use 75%
- save the photo...
- If still too large, repeat above until you get the right size.
Hope this helps.
-Open the .jpg file using microsoft paint.
- Go to the toolbar above and open "image"
- Go to "stretch/skew"
-Go to "stretch" and play with the "horizaontal" and "vertical" ..let say, instead of 100% use 75%
- save the photo...
- If still too large, repeat above until you get the right size.
Hope this helps.
#5
RE: Avatar
OK..I think you are somewhat confused...I can see your Avatar just fine..that is the OSU symbol. You must be talking about your signature....which I can see fine...do you want it smaller? BTW, there is a test section where can play with the signature w/o problems.
Thread
Thread Starter
Forum
Replies
Last Post