another newbie
Thread Starter
Joined: Feb 2008
Posts: 2
From:
another newbie
I am a die hard mustang person , I currently drive an 84 427w twin turbo 5 speed convertible
living in Montana this time of year don't get to drive it much. But have had a few issues since I got it done and am always looking for advice or more commonly known as HELP. Been a mechanic / instructer for 25 years and admit I don't know it all. Here's 1st question my 427w is got 62 cc iron heads with 2.02 vales and I've got about 9.2 to 1 compression witch is a little to much for twin turbo's I'd like to go to aluminum heads and lower my comp. to8.5 -8.8. Any suggestions on heads?
living in Montana this time of year don't get to drive it much. But have had a few issues since I got it done and am always looking for advice or more commonly known as HELP. Been a mechanic / instructer for 25 years and admit I don't know it all. Here's 1st question my 427w is got 62 cc iron heads with 2.02 vales and I've got about 9.2 to 1 compression witch is a little to much for twin turbo's I'd like to go to aluminum heads and lower my comp. to8.5 -8.8. Any suggestions on heads?
Thread
Thread Starter
Forum
Replies
Last Post