Horsepower estimate?
#1
Horsepower estimate?
Hello all!
I'm a new member, building my first higher performance engine, and I could really use some wisdom! I'm trying to get a ballpark estimate for what I can expect my HP to be. Be gentle, I'm still somewhat new to this...
Here is what I'm working with....
coasthigh 302 sb stroked/bored to 347
edelbrock victor jr. heads/intake/water pump
hooker headers w/3 in. collector
spectre performance cold air intake
also, I have a Comp cams camshaft with a .560 lift/294 duration and a holley 750 "double pumper" in the garage, but I'm not sure if those are a little overkill. Any help would really be appreciated.
Thanks!
I'm a new member, building my first higher performance engine, and I could really use some wisdom! I'm trying to get a ballpark estimate for what I can expect my HP to be. Be gentle, I'm still somewhat new to this...
Here is what I'm working with....
coasthigh 302 sb stroked/bored to 347
edelbrock victor jr. heads/intake/water pump
hooker headers w/3 in. collector
spectre performance cold air intake
also, I have a Comp cams camshaft with a .560 lift/294 duration and a holley 750 "double pumper" in the garage, but I'm not sure if those are a little overkill. Any help would really be appreciated.
Thanks!
#2
one more thing...
-In addition, the car should be about the stock weight, minus the difference of a few lighter engine parts.
-3 in. mandrel bent exhaust + h-pipe...flowmaster super 44's
-I'll do my best to answer any further questions...your help is appreciated!
-3 in. mandrel bent exhaust + h-pipe...flowmaster super 44's
-I'll do my best to answer any further questions...your help is appreciated!
Thread
Thread Starter
Forum
Replies
Last Post
MustangForums Editor
Mustang News, Concepts, Rumors & Discussion
0
09-18-2015 12:25 PM
MustangForums Editor
Other Professional Racing
1
09-10-2015 11:41 AM