Steering rod knuckle bushing
#1
Steering rod knuckle bushing
I'm trying to replace the bushings on the steering rod. Not sure if they sell just the bushings...haven't found any to purchase. Only found an entire steering shaft. Does anyone know if they sell just the bushings?
#3
Yes, they sell just the rag joint material. Try "RockAuto" or " LateModelRestoration".
http://www.latemodelrestoration.com/...haft-Rag-Joint
Welcome to the forum, glad to have you.
http://www.latemodelrestoration.com/...haft-Rag-Joint
Welcome to the forum, glad to have you.
Last edited by 88 orangepeel notch; 08-31-2015 at 07:37 AM.
#4
Thanks for the info. Next problem...I'm trying to remove the steering rod shaft. I removed the upper bolt next to the firewall and now trying to loosen the pinch bolt. I sprayed pb12 on it yesterday but it still won't loosen. I'm assuming this needs to loosen so I can remove the shaft. Any suggestions? Thanks
#6
I'd start a new thread in the Tech Section, under the Fox/SN sub section. You'll get alot more responses. This section is just for new members intros. Once someone says welcome, they usually don't check back in. Good luck
Thread
Thread Starter
Forum
Replies
Last Post