NEW 347 Stroker complete engine
I bought this engine from Jegs. It has not been
installed yet it dynos at 442 HP( have all the paper work. It comes
with everything to support the new engine. ECU, Harness ,Fuel Lines,
MSD Coil,In-line Fuel pump. I paid $10,200 a
little over $11,000 after taxes. This is excellent equipment. Please serious inquires only.
The Items are all being stored in climate control
locations . MUST SELL. $8000 OBO, 615-594-1551.
Thanks,
Mike
Block:
• Seasoned block bored .040' over
• Square and parallel decked
• Align honed main bearing bore
• Cylinders are sonic tested for thickness
• Cylinders honed on a computer controlled machine to within .0002'
straightness and roundness
Rotating Assembly:
• SCAT 3.4' stroke forged crankshaft
• SCAT 5.4' rods with 150,000psi bolts
• Probe forged pistons
• Hastings Moly rings
• Clevite bearings
• Balanced rotating assembly
• Melling high volume oil pump
• Heavy duty double roller timing set
Cylinder Heads:
• Dart Aluminum heads
• Hardened retainers and 1.437' diameter valve springs
• 2.02' swirl polished intake valves
• 1.60' swirl polished exhaust valves
• Hardened pushrods
Camshaft Specs:
• Hydraulic Roller
• Duration @ .050' Lift: 216 Intake / 224 Exhaust
• Lift: .544' Intake / .555' Exhaust
• Lobe Separation: 112°
Extras:
• Edelbrock multi-point fuel injection system
• Edelbrock water pump
• MSD distributor
• MSD coil
• MSD spark plug wires
• Signature Series aluminum valve covers
• New 5-quart oil pan
• Brass freeze plugs
• 9.5:1 compression
Horsepower: 435
Torque: 425
[IMG]local://upfiles/75986/F43FBCFF185146CF8DF9BEF21A44A301.jpg[/IMG]
[IMG]local://upfiles/75986/E52F7EF78DB64CDDAAF11A59530D8C64.jpg[/IMG]
[IMG]local://upfiles/75986/2126D7EABA6A4A5D9D0EB4151B5DF3D1.jpg[/IMG]
installed yet it dynos at 442 HP( have all the paper work. It comes
with everything to support the new engine. ECU, Harness ,Fuel Lines,
MSD Coil,In-line Fuel pump. I paid $10,200 a
little over $11,000 after taxes. This is excellent equipment. Please serious inquires only.
The Items are all being stored in climate control
locations . MUST SELL. $8000 OBO, 615-594-1551.
Thanks,
Mike
Block:
• Seasoned block bored .040' over
• Square and parallel decked
• Align honed main bearing bore
• Cylinders are sonic tested for thickness
• Cylinders honed on a computer controlled machine to within .0002'
straightness and roundness
Rotating Assembly:
• SCAT 3.4' stroke forged crankshaft
• SCAT 5.4' rods with 150,000psi bolts
• Probe forged pistons
• Hastings Moly rings
• Clevite bearings
• Balanced rotating assembly
• Melling high volume oil pump
• Heavy duty double roller timing set
Cylinder Heads:
• Dart Aluminum heads
• Hardened retainers and 1.437' diameter valve springs
• 2.02' swirl polished intake valves
• 1.60' swirl polished exhaust valves
• Hardened pushrods
Camshaft Specs:
• Hydraulic Roller
• Duration @ .050' Lift: 216 Intake / 224 Exhaust
• Lift: .544' Intake / .555' Exhaust
• Lobe Separation: 112°
Extras:
• Edelbrock multi-point fuel injection system
• Edelbrock water pump
• MSD distributor
• MSD coil
• MSD spark plug wires
• Signature Series aluminum valve covers
• New 5-quart oil pan
• Brass freeze plugs
• 9.5:1 compression
Horsepower: 435
Torque: 425
[IMG]local://upfiles/75986/F43FBCFF185146CF8DF9BEF21A44A301.jpg[/IMG]
[IMG]local://upfiles/75986/E52F7EF78DB64CDDAAF11A59530D8C64.jpg[/IMG]
[IMG]local://upfiles/75986/2126D7EABA6A4A5D9D0EB4151B5DF3D1.jpg[/IMG]
It does not come with a carb, it does come with a 1000 CFM Edelbrock throttlebody. Thats what the engine came with. Right now the engine is located in Clarksville TN and next week ill be moving and it will be located in Leesville, LA. Call 615-594-1551 if you have any more questions.
Thanks,
Mike
Thanks,
Mike
Thread
Thread Starter
Forum
Replies
Last Post




