Comp Cams 280 Magnum camshaft
08-08-2010, 11:18 AM
#1
Comp Cams 280 Magnum camshaft
Category: Racing Parts
Price: $110
Private or Vendor Listing: Private Listing
Part fits: Classic Mustangs, Mustang II, Fox Body
Location (State/Prov): SC
Item Condition: Brand New
Ford 289-302 Magnum 280H Hydraulic Flat Tappet Camshaft
HYDRAULIC: Broad power. 2500 stall, low gears, 9.5:1 compression and headers. Rough idle.
Magnum Camshafts
Benefits:
• Great high rpm power
• Easy on valve train parts
• Can be used with mild ratio rocker arms and traditional performance
valve springs
Important Considerations:
• Really needs converter and gear changes
• These like compression (9.5:1 & up)
• Larger Magnums are a little lazy at low rpm
Advertised Duration 280 int./280 exh.
Basic Operating RPM Range 2,000-6,000
Cam Style Hydraulic flat tappet
Computer-Controlled Compatible No
Duration at .050 inch Lift 230 int./230 exh.
Intake/Exhaust Valve Lash 0.000 in.
Valve Lift with Factory Rocker Arm Ratio 0.512 in
Lobe Separation (degrees) 110
Only taken out of the box for the photo. Never been used.
Shipping shouldn't run more than $10
Local pickup is also an option.
12-23-2010, 04:33 PM
#2
Thread
Thread Starter
Forum
Replies
Last Post
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM
