Hey guys I put on a vortech a trim trick flow intake and all the other fuel stuf to go along with it. I went to the dyno yesterday and have a big problem! Im not making any boost!!!! It will hit about 5lbs at 5000rpms right as I lift off of it. I am stumped and so is my tuner? Any help would be greatly appriciated.

<ED>

 

What size pulley are you running? Take your piping back off and reinstall it. I've dealt with boost problems before and that was the problem once. Everything looked good but wasn't. Also check your bypass valve. They will stick in a min. May have a blown intake gasket somewhere as well.

 

might be about right depending on the pulley...