I'm looking at this 1993 LX with a blown engine. I was wondering what engine I should put in there since I will have to replace the engine anyways? Any info will be appreciated. Thanks.<IMG src=smileys/smiley15.gif border="0">

 

<IMG src=smileys/smiley1.gif border="0">347 stroker <IMG src=smileys/smiley1.gif border="0">

 

if your gonna go with a windsor, dont get a 347, a 331 is alot more streetable. but modular motors are bad *** in foxbody.

 

why not?
their both very streetable

 

how is a 347 not streetable.... just find a good used 5.0 and stroke it to 347....very streetable and fun

 

Ya they are both streetable. A 347 with give a little bit more torque but the 331 does not burn as much oil. "as i'm told"

 

</P>


thats exactly what im talking about...</P>

 

who knew?????????
put the 347 in mild cam afr 185 heads and you'll have a sweet *** engine to play with and I'm sure you get 50-100k out of it

 

What the........dude, if a 4 speed 455 big block is streetable pumping out over 400 horses and likewise torque, how can a small block not be? <img border="0" src=smileys/smiley4.gif border="0">

 

</P>


haha dude thatsso lame...putting a big block in your car and running that low ofhp...all that unneccasary weight when you could get 400hp out of any small block no problem. and do a little research if you dont believe me, a 331 is a better engine than a 347. im not just trying to make something up here</P>