Updated Pics
01-20-2008, 07:02 PM
#11
5th Gear Member
Thread Starter
Join Date: Oct 2006
Location: MO
Posts: 3,234
RE: Updated Pics
I've thought about that a few times. I might lay some 20% tint on them when it gets a little warmer outside.
I was concerned about safety though.. while the brake lights are fine under the tinted covers.. the third light and the reflectors are the only things that stand out at night on my car in the rear.
I was concerned about safety though.. while the brake lights are fine under the tinted covers.. the third light and the reflectors are the only things that stand out at night on my car in the rear.
ORIGINAL: raubt
That's all coming together very nicely; looks really clean.
Have you considered blacking out the third tail light and the two red side-reflectors? (to the same extent that you blacked out the tail-lights)
That's all coming together very nicely; looks really clean.
Have you considered blacking out the third tail light and the two red side-reflectors? (to the same extent that you blacked out the tail-lights)
01-20-2008, 07:29 PM
#14
1st Gear Member
Join Date: Dec 2006
Location: Maryland
Posts: 90
RE: Updated Pics
That's a bad @$$ looking car man! Kudos for a mean and clean look. How much did the FRPP setup cost ya? Did the dealer install? Talked to a dealer here in SA but they don't want to cut my bumper for me. Makes no sense to me. That all black look is great! keep it up! I couldn't get the video to work, but I'm sure it sounds as nasty as it looks.
01-20-2008, 07:43 PM
#16
5th Gear Member
Thread Starter
Join Date: Oct 2006
Location: MO
Posts: 3,234
RE: Updated Pics
Thanks!
I had a shop that specializes in Mustangs install the exhaust. They charged me $120 for the install and an extra $20 for the cutout. I would have done it myself.. but I had the springs installed at the same time. I paid full price for the FRPP kit. LINK
Here is a video that should work for you:
LINK
I had a shop that specializes in Mustangs install the exhaust. They charged me $120 for the install and an extra $20 for the cutout. I would have done it myself.. but I had the springs installed at the same time. I paid full price for the FRPP kit. LINK
Here is a video that should work for you:
LINK
ORIGINAL: trpcthndr
That's a bad @$$ looking car man! Kudos for a mean and clean look. How much did the FRPP setup cost ya? Did the dealer install? Talked to a dealer here in SA but they don't want to cut my bumper for me. Makes no sense to me. That all black look is great! keep it up! I couldn't get the video to work, but I'm sure it sounds as nasty as it looks.
That's a bad @$$ looking car man! Kudos for a mean and clean look. How much did the FRPP setup cost ya? Did the dealer install? Talked to a dealer here in SA but they don't want to cut my bumper for me. Makes no sense to me. That all black look is great! keep it up! I couldn't get the video to work, but I'm sure it sounds as nasty as it looks.
01-20-2008, 09:33 PM
#18
4th Gear Member
Join Date: May 2007
Location: OC, California
Posts: 1,039
RE: Updated Pics
s
Good move. The Pony Pack rocker stripe looks good on some colors... but not on black. The car looks so much more uniform since you revmoved it. I'm really digging the look of your car... and your exhaust setup. 
ORIGINAL: MrSandman
The top 6 pics are the most recent. I took the side stripes off.
Thanks for the comments!
The top 6 pics are the most recent. I took the side stripes off.
Thanks for the comments!
ORIGINAL: mpatilla
I looked at your other pics. Did you add the mustang letters on the side later, or black them out?
I looked at your other pics. Did you add the mustang letters on the side later, or black them out?
