Camber/Caster Plates
04-06-2016, 06:32 AM
#2
6th Gear Member
Join Date: Feb 2007
Location: state of confusion
Posts: 7,635
Just off the top of my head - Maximum Motorsports, Vorshlag, Steeda . . . I doubt you could go wrong with any of those.
Yes, you'd remove the "camber bolts", and while you're at it replace all four of the strut to knuckle bolts with the newer fine-thread design that gets torqued to something like 166 ft-lbs instead of the 148 that the 2008 OE bolts specify. I've seen them on Maximum Motorsport's page, but I doubt that they're the only folks who can supply them.
Norm
Yes, you'd remove the "camber bolts", and while you're at it replace all four of the strut to knuckle bolts with the newer fine-thread design that gets torqued to something like 166 ft-lbs instead of the 148 that the 2008 OE bolts specify. I've seen them on Maximum Motorsport's page, but I doubt that they're the only folks who can supply them.
Norm
Thread
Thread Starter
Forum
Replies
Last Post
Stoenr
2005-2009 S197 Appearance Section
0
03-31-2016 12:37 PM
XForce USA
XForce-USA
0
03-30-2016 01:06 AM