I'm struggling to start it. I have replaced all the sensors but still not starting despite of cranking well. what must I check next?

 

What codes are you getting? If it isn't starting there should be some codes from the system.

 

I'm attaching the the screenshot of the report for your attention. most of the codes were already cleared out. I'm suspecting on number 7

 

Those aren't "codes" which would be things like P0xxxxx which pinpoints where the problem is. But with it talking about "crash" issues, then perhaps your fuel supply is interrupted. There is a fixture in the driver side kick panel with a "plunger" that trips in a crash to shut off the fuel and might need to be reset.

 

Good morening
I read B1193:00-C0 Crash event Storage full and locked
P0193:00-27 Fuel Rail pressure sensor
circuit high (bank 1)
I replaced this sensor as well and I noted that the fuel is reaching the injectors with good pressure.
BTW can you send me a picture of that plungler that you are talking about? sorry to border you

 

just google fuel inertia switch

 

Yes, that is what it is called, couldn't think of the name for it. And I can't take a picture for you anyway since I don't have a 2012. So a google search is the best bet.