Street/Strip Raced a guy from a light? Had that ride of yours on the timed track? Tell your story here.

Strip Differences

Thread Tools
 
Search this Thread
 
Old May 28, 2006 | 05:58 PM
  #1  
ASUSMC's Avatar
ASUSMC
Thread Starter
4th Gear Member
 
Joined: Apr 2006
Posts: 1,409
From:
Default Strip Differences

Last night.
I went to the track and ran consistant 14.8 with 87 octane in the tank. My 60ft times were right around 2.2 consistant w/ .2 reaction times with minimal spin. I dropped some weight by taking out my spare tire.

Before last night.
I was running consistant 14.6 with 91 octane in the tank. My 60ft times were in the 3.0 range and slightly slower reaction times with major spin. Weighed more with spare tire and other stuff in the car.

Would just the octane of gas create that much of a differential in 1/4 mile times. I know I can run much better 1/4 mile times especially with weight dropped and much more consistancy that I have learned. The car just did not feel like it had the power near the top end.

HELP??????
Old May 28, 2006 | 06:05 PM
  #2  
King Cobra's Avatar
King Cobra
1st Gear Member
 
Joined: May 2006
Posts: 117
From:
Default RE: Strip Differences

Traction is a huge factor, and it can vary from track to track and from run to run. For example, I ran everything from 14.5's to 13.9's with my stock Bullitt...It just depended on traction.

Another huge factor is weather. Heat and, especially, humidity will rob you of horsepower every time. If you just want to go to the strip and test your car to see what it will run, I highly recommend going in January...
Old May 28, 2006 | 06:12 PM
  #3  
90Mustangfan's Avatar
90Mustangfan
I ♥ Acer
 
Joined: Jan 2004
Posts: 1,259
From:
Default RE: Strip Differences

track condition plays a big roll, if the track isnt prepped or prepped good than youll spin more causing lower ets, rule is for every .1 off your 60ft is .2 off your et.
Old May 28, 2006 | 06:15 PM
  #4  
ASUSMC's Avatar
ASUSMC
Thread Starter
4th Gear Member
 
Joined: Apr 2006
Posts: 1,409
From:
Default RE: Strip Differences

I had better traction last night and better 60ft times than before

Hence why I am lost????
Old May 28, 2006 | 10:54 PM
  #5  
Pewterwssicc's Avatar
Pewterwssicc
2nd Gear Member
 
Joined: Mar 2006
Posts: 310
From:
Default RE: Strip Differences

Yes the difference in Octane can make a power difference. While none of our cars(LS1 or stang)must run 91 octane, it is recommended. Running lower octane can be sensed by the car and it may or may not kick down the timing to compensate for the possibility of detonation.
Old May 28, 2006 | 11:04 PM
  #6  
rsw007's Avatar
rsw007
4th Gear Member
 
Joined: Mar 2005
Posts: 1,037
From: south carolina
Default RE: Strip Differences

temp and humidity and altitude can make huge difference.
Old May 29, 2006 | 07:13 PM
  #7  
jkm1987's Avatar
jkm1987
3rd Gear Member
 
Joined: Apr 2005
Posts: 777
From:
Default RE: Strip Differences

60ft is the problem, ive raced at two tracks one i ran consisten 9.3's withthe best of a 9.2 the other i ran consistent 9.0 with the best of a 8.9 it was about 60 the day i raced at the second track about 75 the day at the other no changes in the car minus going from weld on flows to magnaflow catback
Old May 29, 2006 | 09:13 PM
  #8  
96 TBird 4.6's Avatar
96 TBird 4.6
1st Gear Member
 
Joined: Apr 2005
Posts: 125
From: Long Island, NY
Default RE: Strip Differences

there are many factors as you can see in drag racing at a track. but from your times, the higher the octane the better times. i bet most of us here can agree that a 4.6 or 5.0 runs like crap on 87. i know mine does but its got some miles on it (120k). my car seems sluggish with 87 and some pinging in the engine. on 93 it runs real smooth, shifts great and sounds a whole lot better as well as much better respone when given some throttle.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Dokilar
4.6L (1996-2004 Modular) Mustang
15
Oct 16, 2015 08:13 PM
UrS4
S197 Handling Section
1
Sep 30, 2015 10:13 AM
wraith777
General Tech
1
Sep 28, 2015 10:49 AM
GLOCKer
General Tech
0
Sep 28, 2015 07:36 AM




All times are GMT -5. The time now is 07:51 PM.