Street/Strip Raced a guy from a light? Had that ride of yours on the timed track? Tell your story here.

first time at the track

Thread Tools
 
Search this Thread
 
Old Sep 10, 2006 | 02:02 AM
  #1  
fishyducky's Avatar
fishyducky
Thread Starter
2nd Gear Member
 
Joined: Jul 2006
Posts: 322
From: Havelock, NC
Default first time at the track

well i went to the track for the first time. im dissapointed with how i did. my best with the mach was a 13.807 at 104 mph. that was my BEST and i consistantly ran low 14s. even when my launches are good, i rarely ran 13.9. im crossing the line in 3rd at redline, so im wondering if i should shift into 4th at about 6 grand to get back into the powerband for the last couple 100 feet? from first to 2nd i shift right at redline and fom 3nd to third i shift at 6 grand. wat do u guys think?
Old Sep 10, 2006 | 02:08 AM
  #2  
snakeman4life's Avatar
snakeman4life
4th Gear Member
 
Joined: Jul 2006
Posts: 1,209
From:
Default RE: first time at the track

I'm not sure about Mach 1s but N/A Cobras make their peak hp at 6k.What do Mach's redline at?
Old Sep 10, 2006 | 02:17 AM
  #3  
fishyducky's Avatar
fishyducky
Thread Starter
2nd Gear Member
 
Joined: Jul 2006
Posts: 322
From: Havelock, NC
Default RE: first time at the track

the redline is at 6800
Old Sep 10, 2006 | 02:23 AM
  #4  
snakeman4life's Avatar
snakeman4life
4th Gear Member
 
Joined: Jul 2006
Posts: 1,209
From:
Default RE: first time at the track

Then I would say leave it in 3rd since 4 valves love to rev.What kind of 60ft times were you running?Since 104mph trap with a good launch should put you somewhere in the mid 13s.
Old Sep 10, 2006 | 02:55 AM
  #5  
fishyducky's Avatar
fishyducky
Thread Starter
2nd Gear Member
 
Joined: Jul 2006
Posts: 322
From: Havelock, NC
Default RE: first time at the track

about a 2.27 60 foot
Old Sep 10, 2006 | 11:10 AM
  #6  
OneGearhead's Avatar
OneGearhead
6th Gear Member
 
Joined: Mar 2004
Posts: 5,867
From: VA
Default RE: first time at the track

ORIGINAL: fishyducky

about a 2.27 60 foot
definitely get that down, and youll see mid 13's no problem. and like snake said, leave it in 3rd since they like to rev.
Old Sep 10, 2006 | 09:20 PM
  #7  
72MachOne99GT's Avatar
72MachOne99GT
2010 Blue Ball Award Recipient
 
Joined: Dec 2004
Posts: 7,907
From: Eskimo Village, Indiana *No Igloo*
Default RE: first time at the track

based on your times.. i'd say you need 1 mod to get mid-low 13's

and that's a set of BFG or MT Drag Radials

(once you get more comfortalbe with your car you'll do alot better too.)
Old Sep 11, 2006 | 12:01 AM
  #8  
Blownsvt's Avatar
Blownsvt
5th Gear Member
 
Joined: Jul 2006
Posts: 2,407
From:
Default RE: first time at the track

i went to the track for the first time yesterday also and made a best of 12.31 at 115.04 and that wsa a 1.93 60' on street tires. and in 100% street trim including the garage door opener on the visor and the spare in the trunk.
just keep working on that luanch thats the key to a good time imo.
my first run of the day i ran a high 13 because i spun all the way into 3rd gear because i just tried to rev up and dump the clutch of the line. just practice a bit and get that 60' time down under 2.0 and you'll be looking good.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
carid
General Tech
1
Jul 8, 2016 09:55 AM
StalkerGT
5.0L (1979-1995) Mustang
13
Sep 25, 2015 02:41 PM
RWHEELS
S197 Handling Section
4
Sep 5, 2015 03:42 PM
whatsup62
5.0L GT S550 Tech
1
Sep 3, 2015 01:38 PM
tj@steeda
Steeda Autosports
0
Sep 1, 2015 08:16 PM




All times are GMT -5. The time now is 02:05 AM.