Talon TSI vs. WS6
ORIGINAL: KTownGT
The one Bhare ran was ~20 PSI on a stock motor. How much hp are you making?
ORIGINAL: BoOsTeDeAgLe
Thanks, but it shoulda ran some more lol. I'm pretty much stuck with 15psi until I get some I/C piping made.
Thanks, but it shoulda ran some more lol. I'm pretty much stuck with 15psi until I get some I/C piping made.
pretty close he had 19PSI supposedly
http://videos.streetfire.net/video/6...2b00f28ebd.htm
ORIGINAL: Morbid Intentions
pretty close he had 19PSI supposedly
http://videos.streetfire.net/video/6...2b00f28ebd.htm
ORIGINAL: KTownGT
The one Bhare ran was ~20 PSI on a stock motor. How much hp are you making?
ORIGINAL: BoOsTeDeAgLe
Thanks, but it shoulda ran some more lol. I'm pretty much stuck with 15psi until I get some I/C piping made.
Thanks, but it shoulda ran some more lol. I'm pretty much stuck with 15psi until I get some I/C piping made.
pretty close he had 19PSI supposedly
http://videos.streetfire.net/video/6...2b00f28ebd.htm
ORIGINAL: BoOsTeDeAgLe
LOL, guess he forgot that extra boost needs extra fuel.
ORIGINAL: Morbid Intentions
pretty close he had 19PSI supposedly
http://videos.streetfire.net/video/6...2b00f28ebd.htm
ORIGINAL: KTownGT
The one Bhare ran was ~20 PSI on a stock motor. How much hp are you making?
ORIGINAL: BoOsTeDeAgLe
Thanks, but it shoulda ran some more lol. I'm pretty much stuck with 15psi until I get some I/C piping made.
Thanks, but it shoulda ran some more lol. I'm pretty much stuck with 15psi until I get some I/C piping made.
pretty close he had 19PSI supposedly
http://videos.streetfire.net/video/6...2b00f28ebd.htm
ORIGINAL: drhoward
Damn I wish my talon was that fast...... stupid cheap car
Damn I wish my talon was that fast...... stupid cheap car
Boost controller kit-$50
ACT clutch & press. plate-~$300
Used EVO injectors~$50-100
I got a hell of a deal on my turbo, but you can pick up a used 16g for $400-500 (or even new)
Amp wiring kit (to rewire fuel pump with larger guage)-$20-40
All the rest is just weight reduction, I took out about 150-200 lbs. of stuff I didn't need, and I still have A/C.
ORIGINAL: KTownGT
Or Aftermarket internals? [&:]
ORIGINAL: BoOsTeDeAgLe
LOL, guess he forgot that extra boost needs extra fuel.
ORIGINAL: Morbid Intentions
pretty close he had 19PSI supposedly
http://videos.streetfire.net/video/6...2b00f28ebd.htm
ORIGINAL: KTownGT
The one Bhare ran was ~20 PSI on a stock motor. How much hp are you making?
ORIGINAL: BoOsTeDeAgLe
Thanks, but it shoulda ran some more lol. I'm pretty much stuck with 15psi until I get some I/C piping made.
Thanks, but it shoulda ran some more lol. I'm pretty much stuck with 15psi until I get some I/C piping made.
pretty close he had 19PSI supposedly
http://videos.streetfire.net/video/6...2b00f28ebd.htm
[quote]ORIGINAL: BoOsTeDeAgLe
[quote]ORIGINAL: KTownGT
Nah, they don't really need internals unless they're pushing 450+ daily, and that's only the rods.
Usually when people blow 4g63's it's because it's running too lean with too much boost.
[quote]ORIGINAL: KTownGT
ORIGINAL: BoOsTeDeAgLe
LOL, guess he forgot that extra boost needs extra fuel.
ORIGINAL: Morbid Intentions
pretty close he had 19PSI supposedly
http://videos.streetfire.net/video/6...2b00f28ebd.htm
ORIGINAL: KTownGT
The one Bhare ran was ~20 PSI on a stock motor. How much hp are you making?
ORIGINAL: BoOsTeDeAgLe
Thanks, but it shoulda ran some more lol. I'm pretty much stuck with 15psi until I get some I/C piping made.
Thanks, but it shoulda ran some more lol. I'm pretty much stuck with 15psi until I get some I/C piping made.
pretty close he had 19PSI supposedly
http://videos.streetfire.net/video/6...2b00f28ebd.htm
Or Aftermarket internals? [&:]
Usually when people blow 4g63's it's because it's running too lean with too much boost.
ORIGINAL: BoOsTeDeAgLe
Nah, they don't really need internals unless they're pushing 450+ daily, and that's only the rods.
ORIGINAL: KTownGT
Or Aftermarket internals? [&:]
ORIGINAL: BoOsTeDeAgLe
LOL, guess he forgot that extra boost needs extra fuel.
ORIGINAL: Morbid Intentions
pretty close he had 19PSI supposedly
http://videos.streetfire.net/video/6...2b00f28ebd.htm
ORIGINAL: KTownGT
The one Bhare ran was ~20 PSI on a stock motor. How much hp are you making?
ORIGINAL: BoOsTeDeAgLe
Thanks, but it shoulda ran some more lol. I'm pretty much stuck with 15psi until I get some I/C piping made.
Thanks, but it shoulda ran some more lol. I'm pretty much stuck with 15psi until I get some I/C piping made.
pretty close he had 19PSI supposedly
http://videos.streetfire.net/video/6...2b00f28ebd.htm


