Just went to the track this weekend just wanted to post the times
and see what you guys think.
r/t .342
60ft 2.193
1/4 14.489
mph 97.14

this was my best time out of 6 runs, other runs were mainly 14.6s but never got into 15s thank god. it was my first time at the track with this car so i just wanted to kno if i should be running slower, faster. i think i should be able to get a little better times, but n e way heres the description.

89lx 5.0
bbk short throw
KC clutch
strut tower brace
stock gear
225 F1s in front
245 in back
cai
tb with spacer
flex lite fan
shorty headers
bbk x pipe with cats
flowtech cat back
thats it i think, thanks guys

 

Pretty darn good for a bolt on fox with stock rearend.

 

not bad times, get some 4.10's (if you stay NA), upper and lower control arms, and some drag radials and you will break into the 13's

 

not bad for the few mods you have. suggest you get subframe connectors and some new lower control arms like the HPM Megabyte Jr. or Southside Machine bars to help plant the rear end at the launch to improve that 60' time. also lower the air pressure in your rear tires to 22 or so psi and see if this doesn't help your times some too. some rear gears like 3.73's will also be a big improvement too!

 

yea i think my next move will be 3.73s and some subframes then ill take it from there, thanks guys

 

what about power mods? whats next?

 

dont know, ive had my eye on that holley systemax kit which says "350 hp on dyno" which is prolly more like 300, but i thought it would be good especially cause im lookin at a supercharger way down the road. lotta $ though [:@]

 

does anyone have or has had this kit, any feedback would be good. How does it compare to the Trick Flow kit which is very similar?

 

don't know about the Trick Flow kit but I could swear I remember seeing the boys on Two Guys Garage do the Holley kit and dyno it for 400 HP but can't be positive about it. Maybe they'll replay it during the winter and I'll see it again.

 

Holley system max is a good kit, but I have heard the heads are not that good for a blower application, the upper intake is great for it.