Street/Strip Raced a guy from a light? Had that ride of yours on the timed track? Tell your story here.

98 Cobra vs LS1 Racing in Arizona 4

Thread Tools
 
Search this Thread
 
Old Jul 31, 2008 | 02:05 PM
  #121  
USMCrebel's Avatar
USMCrebel
Mach I Section Moderator
 
Joined: Mar 2007
Posts: 7,140
From: round abouts these parts
Default RE: 98 Cobra vs LS1 Racing in Arizona 4

ORIGINAL: S8ER01Z

ORIGINAL: USMCrebel

no he is saying the average driver wont run 12's in an ls1....
Exactly.... and the average driver will still run a 13.1 in a Mach 1.... [8D]

Now that it's all settled...I have some programming to go do.
***[>:]

i think 13.5 @104 with only 26 passes is pretty damn good, but this average mach 1 driver will smoke you like a bad joint! j/k
how are your new mods treating you? i didn't get to race you while at us41 b/c no one showed
Old Jul 31, 2008 | 02:51 PM
  #122  
Creedence's Avatar
Creedence
1st Gear Member
 
Joined: Feb 2006
Posts: 73
From:
Default RE: 98 Cobra vs LS1 Racing in Arizona 4

I've seen mach 1s do better than ls1s before and vice versa. Generally speaking the stick ls1 will beat the stick mach1, but different outcomes are always possible. You guys are acting like its straight up law there will be a certain result.

I've got a full bolt on AUTO gt that has run a 13.41 before while hot lapping it, and is considerably faster at the 1/8th mile since I tuned it and took care of some other BS. I've beaten ls1s at the strip and on the street. Granted stock or just catback ones, but I ran the same time as this one kid with an auto 01 z28 that has catback, aluminum driveshaft, panhard bar, and 3.42 gears.

I'm at work and bored so I'm rambling, but as far as stock goes, his came from the factory with that junk except for the catback, I saw the build sheet. Point is there is always something faster and this **** is never set in stone.
Old Jul 31, 2008 | 04:45 PM
  #123  
S8ER01Z's Avatar
S8ER01Z
6th Gear Member
 
Joined: Sep 2006
Posts: 5,565
From: NC
Default RE: 98 Cobra vs LS1 Racing in Arizona 4

ORIGINAL: USMCrebel

ORIGINAL: S8ER01Z

ORIGINAL: USMCrebel

no he is saying the average driver wont run 12's in an ls1....
Exactly.... and the average driver will still run a 13.1 in a Mach 1.... [8D]

Now that it's all settled...I have some programming to go do.
***[>:]

i think 13.5 @104 with only 26 passes is pretty damn good, but this average mach 1 driver will smoke you like a bad joint! j/k
how are your new mods treating you? i didn't get to race you while at us41 b/c no one showed
Well so far my new 1LE springs are doing pretty good... I still don't have a lid though.... so I haven't bothered with the track yet... I guess I missed US41 [8D] Of course after the last trip I don't know if I would have wasted to gas to make it out there...(nothing against you but the trap was rather sub-par for the money it took to get there AND get in).
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MustangForums Editor
Mustang News, Concepts, Rumors & Discussion
3
Nov 10, 2015 11:39 AM
ctgreddy
Street/Strip
13
Oct 14, 2015 09:05 PM
mikesr4565
Suspension
5
Sep 21, 2015 10:26 AM
MustangForums Editor
Street/Strip
5
Sep 8, 2015 06:25 PM
Sparks_88
4.6L (1996-2004 Modular) Mustang
0
Sep 8, 2015 01:06 PM




All times are GMT -5. The time now is 10:19 PM.