Street/Strip Raced a guy from a light? Had that ride of yours on the timed track? Tell your story here.

racing a 5.0 tomorrow

Thread Tools
 
Search this Thread
 
Old Aug 16, 2008 | 06:09 PM
  #1  
06windveilgt's Avatar
06windveilgt
Thread Starter
1st Gear Member
 
Joined: Nov 2006
Posts: 70
From:
Default racing a 5.0 tomorrow

me: stock

him: 1990 5.0 5 spd with a cobra intake and cams..i'm pretty sure he does NOT have full exhaust.

we hav raced a little while back before he had his intake and cams and of course i murdered him. but he is positive he is gonna take me.

what do you guys think?
Old Aug 16, 2008 | 06:20 PM
  #2  
trines80's Avatar
trines80
 
Joined: Aug 2007
Posts: 10
From: Mississippi
Default

5.0 vs 06 GT, my money is on the 06 GT. The old 5.0's are weak. Baseline hp on a 5.0 was like 200hp at the flywheel.
Old Aug 16, 2008 | 06:33 PM
  #3  
99GTvert's Avatar
99GTvert
is my username.
 
Joined: May 2006
Posts: 13,808
From: Earth
Default

Baseline crank hp at that year was about 225....but I still don't think he'll take you.
Old Aug 16, 2008 | 06:35 PM
  #4  
trines80's Avatar
trines80
 
Joined: Aug 2007
Posts: 10
From: Mississippi
Default

If you got 225 it was usually the Cobra Model wasn't it? Not real sure. The new v6 will probly beat the old 5.0 or give it a hell of a run.
Old Aug 16, 2008 | 06:40 PM
  #5  
simpsonfan13's Avatar
simpsonfan13
ELEKTRO-FIDE Moderator
 
Joined: Jul 2006
Posts: 2,356
From: In Geo-synchronous orbit over redass' bathroom,
Default

you should still take him.
does he have HEADS? cuz the e7's are the most restrictive part of the
stock h/c/i set up. the intake and cams should help him out though.


and careful on bashing the 5.0's trines80.
yes stock the 302's arent anything spectacular.
but, if you're stock and run up on a h/c/i-exhaust fox with saaaay... 3.73's, you'll find you're self eating your words.

+1 to 99 the cobra had 235hp
the GT and 5.0 LX had 225hp

and a new v6 wouldn't quite be as close as you think. the 5.0 out torques it by 40ft/lbs and out powers it by
15hp. not to mention the foxes are a good deal lighter

Last edited by simpsonfan13; Aug 16, 2008 at 06:44 PM.
Old Aug 16, 2008 | 07:17 PM
  #6  
06windveilgt's Avatar
06windveilgt
Thread Starter
1st Gear Member
 
Joined: Nov 2006
Posts: 70
From:
Default

i just asked him and he told me he DOES have headers..i dont know why i thought he didnt
Old Aug 16, 2008 | 07:25 PM
  #7  
06windveilgt's Avatar
06windveilgt
Thread Starter
1st Gear Member
 
Joined: Nov 2006
Posts: 70
From:
Default

ok guys he just texted me his setup and it is:

headers, intake, cams, and cobra intake manifold with a rebuilt short block and crank shafts

now what do you guys think?

Last edited by 06windveilgt; Aug 16, 2008 at 07:28 PM.
Old Aug 16, 2008 | 07:33 PM
  #8  
ThisBlood147's Avatar
ThisBlood147
5th Gear Member
 
Joined: Jan 2006
Posts: 4,197
From: Louisiana
Default

I think you should just run'em and find out. Bench racing accomplishes nothing in these cases.....unless the input of everyone here decides whether or not you are gonna race him.
Old Aug 16, 2008 | 07:48 PM
  #9  
06windveilgt's Avatar
06windveilgt
Thread Starter
1st Gear Member
 
Joined: Nov 2006
Posts: 70
From:
Default

thisblood: i totally agree but if you guys think i wont be able to beat him i would rather not race because i will never hear the end of my friend talking mess if he beats me.

if i had my stock 17's and tires on i wouldn't hesitate to race him..but i'm concerned the 20's are going to slow me down enough to give him the win.
Old Aug 16, 2008 | 07:49 PM
  #10  
Red Turbo Integra's Avatar
Red Turbo Integra
4th Gear Member
 
Joined: Jul 2006
Posts: 1,156
From: Ohio
Default

When you say rebuilt, what do you mean? Rebuilt back to stock, or rebuilt for racing. If he upped his C/R and stroked it, you could be in a world of hurt. That's something you'll probably need to know to be able to guage accuratly. You say he's confident he's gonna beat you, and he knows your setup so you never know. Maybe he got some NO2 or something too.



All times are GMT -5. The time now is 02:45 PM.