04 e46m3 vs mach1
guy wants to run me from a dig with a 04 bone stock e46m3 hardtop stick... with my mods i should pull him right? and just curious on how i would do from a 40 roll as well?..thanx...
bone stock with a GOOD driver they run 13.8 or so. Most I see run low 14's.
Fastest I've seen was 13.1xx on drag radials and other mods of which I'm can not recall.. Spoke to the guy briefly and the car was all motor.
I montor about 20 different car specific boards, so I can pretty much tell you what any car should run. This helps me pick my victims at test n tune.
You should get him, but it's fast enough to get you if make a mistake.
More info next time will help.
Fastest I've seen was 13.1xx on drag radials and other mods of which I'm can not recall.. Spoke to the guy briefly and the car was all motor.
I montor about 20 different car specific boards, so I can pretty much tell you what any car should run. This helps me pick my victims at test n tune.
You should get him, but it's fast enough to get you if make a mistake.
More info next time will help.
good news guys!!! i raced him 2day 2wice from a dig and once from a roll. i lit em up before so my tires tuck pretty good...those things are EXTREMELY FAST.. from the digs (0-115) i put about 3/4-1 car lenght on him, and from a 40-115 roll i only put about 1/2 car length on him,...he was a good stick driver...dam! it was a very very close race but i took him out...thanks for the help... he had (cai and a tune)
Thread
Thread Starter
Forum
Replies
Last Post
NeoTokyo
General Tech
0
Apr 23, 2005 01:15 AM
NeoTokyo
General Tech
3
Apr 17, 2005 12:39 AM




