first time to the strip in 7yrs
#1
first time to the strip in 7yrs
finally got back out to the track with my new 99 cobra. car is virtually stock except for bbk cold air intake xpipe head tick mod magnaflow mufflers and cross drilled and slotted rotors. i know some of those dont add horsepower but mentioned so you get an idea on how stock it is.
track prep was horrible as in non existent EVERYONE was spinning even a 10sec dually truck. im sure you get the picture but here are my numbers (all 1/8th)
first pass right off the street was a 9.44
i dont have the rest of the numbers as the slip flew out during my 2nd run.
2:
60: 2.37
330: 6.20
1/8: 9.29 @ 80.17 best time of night
3:
60: 2.39
330: 6.22
1/8: 9.32 @ 80.05
4:
60: 2.50
330: 6.35
1/8: 9.44 @ 80.35
5: had a passenger
60: 2.50
330: 6.52
1/8: 9.72 @ 77.09
6: had a passenger
60: 2.42
330: 6.33
1/8: 9.47 @ 78.53
7:
60: 2.52
330: 6.4
1/8: 9.5 @ 80.05
8:
60: 2.36
330: 6.22
1/8: 9.33 @ 79.95
track prep was horrible as in non existent EVERYONE was spinning even a 10sec dually truck. im sure you get the picture but here are my numbers (all 1/8th)
first pass right off the street was a 9.44
i dont have the rest of the numbers as the slip flew out during my 2nd run.
2:
60: 2.37
330: 6.20
1/8: 9.29 @ 80.17 best time of night
3:
60: 2.39
330: 6.22
1/8: 9.32 @ 80.05
4:
60: 2.50
330: 6.35
1/8: 9.44 @ 80.35
5: had a passenger
60: 2.50
330: 6.52
1/8: 9.72 @ 77.09
6: had a passenger
60: 2.42
330: 6.33
1/8: 9.47 @ 78.53
7:
60: 2.52
330: 6.4
1/8: 9.5 @ 80.05
8:
60: 2.36
330: 6.22
1/8: 9.33 @ 79.95
#6
The 99/01 cobra is 28 spline halfshafts compared to terminator 31s, its very easy to bust those axle with sticky tires even with a bolt on car.
#9
I didnt know the 01s had 31 spline lol, if u dont get wheel hop they should hold up, those 28 spline half shafts are almost instant broke with wheel hop and sticky tires, ive helped push enough em back off the track to attest to that.