Recently got sr v2 coilovers for dirt cheap on am because of open box and missing part discount. But they’re now giving me a hard time to return them once I found out they have 2 passenger side camber plates on them. Because on driver side it slides horizontally and not vertical towards motor like on the passenger side. Not sure if the alignment shop would be able to get them close to spec like that. Pretty positive they are incorrect but couldn’t find any pics to confirm that both should be vertical. Can line it up properly if I drill a hole in strut tower. Can anyone give me some guidance on what’s best to do and if drilling a hole will cause issues on a 3 bolt setup. American muscle may refund me for them but won’t know for 3 days.