Ranger Cam?
Thread Starter
Joined: Feb 2008
Posts: 7
RE: Ranger Cam?
ORIGINAL: MIGISMALLS
so all you need is the cam? or do you need to do any other mods to make it fit? wouldnt mind doing that to my lil' SVO.... sounds like a really cheap way to get a couple of ponys. lol would really like to know how to go about doing that lil' swap.
so all you need is the cam? or do you need to do any other mods to make it fit? wouldnt mind doing that to my lil' SVO.... sounds like a really cheap way to get a couple of ponys. lol would really like to know how to go about doing that lil' swap.
6th Gear Member
Joined: Sep 2006
Posts: 9,991
From: Regina Beach, Sask
RE: Ranger Cam?
ORIGINAL: 84S.V.O
Where???
ORIGINAL: sleeper_inc
I can get one for $15 lol
I can get one for $15 lol
Pretty sure it's a straight swap... right?? all you need it the cam and the roller followers... i think
3rd Gear Member
Joined: Mar 2006
Posts: 691
From:
RE: Ranger Cam?
I have one it sux, only good for the fact that it is a roller and wears down slower than a slider, in fact many say the stock slider is a better cam to begin with, i am going essy 2277 on mine very soon
5th Gear Member
Joined: Jan 2006
Posts: 2,298
From: Severn, Md
RE: Ranger Cam?
The ranger roller cam actually makes all of its power very low. It has less valve overlap, which turbos don't like as much, but the duration helps with the power.
The trick to making the ranger roller cam work well is getting an adjustable cam pulley. I have mine retarded 4*, and it makes power up to the rev limiter.
Get the cam, followers, and a new cam seal. Remember to install the seal AFTER you install the cam.
The trick to making the ranger roller cam work well is getting an adjustable cam pulley. I have mine retarded 4*, and it makes power up to the rev limiter.
Get the cam, followers, and a new cam seal. Remember to install the seal AFTER you install the cam.
Thread
Thread Starter
Forum
Replies
Last Post
junior04
4.6L (1996-2004 Modular) Mustang
1
Sep 28, 2015 10:53 AM
