SVT Forums

04 time question

Thread Tools
 
Search this Thread
 
Old 08-16-2006, 07:05 PM
  #1  
Mr_Cobra
1st Gear Member
Thread Starter
 
Mr_Cobra's Avatar
 
Join Date: Aug 2006
Location:
Posts: 107
Default 04 time question

about what would the 0-60 and 1/4 mile times be for a cobra with these mods
2.8 pulley
sct tuner
exhaust
intercooler
K&N air intake
about 450 RWHP
Mr_Cobra is offline  
Old 08-16-2006, 09:27 PM
  #2  
spray175
3rd Gear Member
 
spray175's Avatar
 
Join Date: Nov 2005
Location: Maryland
Posts: 926
Default RE: 04 time question

Thats good for a low 12 maybe high 11's with a good 60ft time.
spray175 is offline  
Old 08-16-2006, 11:35 PM
  #3  
cobrabite
 
cobrabite's Avatar
 
Join Date: Aug 2006
Posts: 18
Default RE: 04 time question

its pretty much what he said depending on where you live, if you live in northern mass like me. then you could go a bit faster in the fall i am sure. i have seen some cobras with those mods and some good tires get into the low 11's easy....and obviously the good driver mod helps too!
cobrabite is offline  
Old 08-17-2006, 02:33 AM
  #4  
spray175
3rd Gear Member
 
spray175's Avatar
 
Join Date: Nov 2005
Location: Maryland
Posts: 926
Default RE: 04 time question

How much torque are you putting out? I saw a guy at the track with the same mods run a 12.3 but he said he's run quicker.
spray175 is offline  
Old 08-17-2006, 01:17 PM
  #5  
CobraSnake
5th Gear Member
 
CobraSnake's Avatar
 
Join Date: Jan 2006
Location: Milwaukee, WI
Posts: 3,479
Default RE: 04 time question

and drag radials or slicks always are good too. With those mods you would also want to build up the IRS a little so you don't brake your rear end.
CobraSnake is offline  
Old 08-17-2006, 03:04 PM
  #6  
Dan04COBRA
Super Moderator
 
Dan04COBRA's Avatar
 
Join Date: Jul 2003
Location:
Posts: 14,917
Default RE: 04 time question

Good traction and that is worth all of a 11 sec ET.

Without it, plan on running mid 12's until you can hook up.
Dan04COBRA is offline  
Old 08-17-2006, 11:05 PM
  #7  
Mr_Cobra
1st Gear Member
Thread Starter
 
Mr_Cobra's Avatar
 
Join Date: Aug 2006
Location:
Posts: 107
Default RE: 04 time question

Sorry i have been out for a couple days...thanks for the info. Torque is at about 470 last time on the dyno it was 463 torque and 440 HP and the only thing i have added since then was the K&N air intake. i do need better tires and what tires would be good to get and what can i do to strenghten the IRS? this car is not an everyday driver car but i do drive it a good bit so i would want something that is still somewhat road friendly. i dont think i will be putting much more HP into it for a little bit but i do notice if i romp on it i get wheel hop.....i know its bad and i pull off as soon as that starts but i want to know what i can do to prevent that from happening. thakns for the input
Mr_Cobra is offline  
Old 08-18-2006, 01:48 AM
  #8  
JamesTronix
2nd Gear Member
 
JamesTronix's Avatar
 
Join Date: Jul 2006
Location:
Posts: 398
Default RE: 04 time question

Get some Nitto 555r drag radials and an IRS brace.
JamesTronix is offline  
Old 08-18-2006, 02:50 AM
  #9  
spray175
3rd Gear Member
 
spray175's Avatar
 
Join Date: Nov 2005
Location: Maryland
Posts: 926
Default RE: 04 time question

Definately go with the brace. I just got one for my car. Didnt install it yet but hopefully will get it soon. You can get the bushings as well and lowering springs. That will help a whole lot. And if you want to get crazy level 5 halfshafts. Getting kinda pricey though.
spray175 is offline  
Old 08-18-2006, 03:46 AM
  #10  
primetime5.0
6th Gear Member
 
primetime5.0's Avatar
 
Join Date: Dec 2003
Location: United States
Posts: 9,587
Default RE: 04 time question

my buddy has a 2.2kb on his car and it went 11.3 on a stock irs... 6k launch on slicks... as long as it doesnt hop your not going to have problems
primetime5.0 is offline  


Quick Reply: 04 time question



All times are GMT -5. The time now is 09:24 PM.