also would any thang happen to my engine if i dont have nothing on from the cats

 

it will be louder =)

 

will it **** any thang up

 

it shouldn't

 

will i loss hp

 

no maybe a little torque because of reduced back pressure, but other than that it should really be perfectly fine

 

ok good...

 

also what will i boost at when i get my supercharger back...

 

its the same boost, but the hp goes up with the extra cfm the blower puts out... but there is an option to put a larger crank pulley on... but you have to be careful not to over spin the eaton. just stick with a 2.8 and a port.. with supporting mods you'll be 500+

 

When you get your blower back from being PP I would go with a 2.93 upper & 4lb lower.