I'm heading to Mustang Magic in Long Island, NY this Saturday for a dyno /tune set-up!!...Any predections about the HP I'll put down?! Set-up in my sig.! ....Currently running a canned tune(s) from RWTD...What kind of A/F ratio's should I see to be safe?

After the first pull with the 2.93" pulley (and for a baseline), I'm putting on the 2.76" BF upper pulley and getting a tune for the steet and track...I'm hauling 10 gallons on VP 100 octane Street Blaze race fuel for the race tune! It's about a 4 hour trip each way...weather looking good, should be a good time!!

 

485 rwhp...

 

440street, 460race

 

^ Those numbers are low... IMO...

We had a guy with a 2.80 pulley, stock lower, dyno 464/490 on PUMP, on the stock Eaton...

 

we'll see =)... i dont see it putting down more than 440 on a safe tune...

you can tune the crap outta one of these cars... but he's saying "safe" tune

 

And I'm talking SAFE tune as well...

Pump gas? 11.8 AFR with 18-19 degrees of timing...

 

Well, the 2 tunes that came with my SCT from RWTD are called "21 degree & 23 degree" for the base...for what that's worth....

Anyways, Just downloaded "Dynolicious" with my step-sons iPod Touch!! Pretty cool for $12, works like a G-tech Pro...Took the Cobra out last night for a quick spin...made 450 rwhp spinning pretty hard (took the Nitto 315 DR's off for the trip to Mustang Magic...wish I had them on!), I was even spinning in 3rd...got up to about 115mph...and shifted at about 5800-6000 rpm's...1st & 2nd, forget it! Like I said, spinning real hard with the Nitto (555 radial) 275 tires!! ...can't wait for Saturday!!

I just want to be "safe" with the MAX tune!!

 

470rwhp.....i made 446 with a 2.8 pulley and my buddy in MD made 480 with the same one...so 470rwhp on 93 and 487 on race gas

 

I think you'll be over 500 on both . A client of mine has an 04' with a Steigeimier ported Eaton and an Eric Brooks tune @ close to 500 on the stock pullies .

 

Thanks guys...I'd be happy above 475hp...I'll post results when I get back!