Which CAI for 04Cobra
08-05-2009, 10:07 PM
#1
Thread Starter
Join Date: Oct 2007
Location: Illinois
Posts: 16
Which CAI for 04Cobra
My car is pretty much stock. I know it has a full borla exhaust with long tubes, no cats. And the dealership said it has a chip n its tuned. I do not know what kinda tune or anything it has. I just know its got the traction control shut off. Car runs great. Just looking to grab some more HP. I am also interesting in swapping out the pulley and getting it retuned. Any help with the CAI and Pulley will be appreciated.
08-05-2009, 10:28 PM
#2
5th Gear Member
Join Date: Jul 2005
Location: Georgia-Gwinnett
Posts: 2,940
are you sure you have the stock pulley? Rarely do people get tunes without a pulley. But as far as pulleys go if you just want to do an upper id go with a billetflow 2.76 with a 100mm snub idler. You will also need new spark plugs with a pulley swap. As far as intakes go i like the k&n, you can pick up a used one cheap on ebay or svtperformance.
08-05-2009, 10:29 PM
#3
6th Gear Member
Join Date: Mar 2007
Location: Chicago, IL
Posts: 6,169
Before you spend any money on mods, you need to take that car to a tuner and get the air/fuel and the tuned checked. Where at in IL are you? I take my car to Bob Kurgan over at Kurgan motorsports in Byron IL.
08-05-2009, 10:37 PM
#5
6th Gear Member
Join Date: Mar 2007
Location: Chicago, IL
Posts: 6,169
Hmmm....You need to get that tuned check first thing. Their is Sutton HP in Mattson IL I believe. What kind of Longtube Headers are they? For intake I got a K&N FIPK, I ordered it from Lethal Performance. They got the best selection for our cars.
08-05-2009, 11:14 PM
#6
Thread Starter
Join Date: Oct 2007
Location: Illinois
Posts: 16
Well my next thing is where? The closest spot is Anderson Ford in Clinton Illinois... Anyone have other suggestions? There is a Central Illinois Dyno, in Port Byron illinois, but i have heard nothing about them.
08-05-2009, 11:25 PM
#8
4th Gear Member
Join Date: Jan 2009
Location: California
Posts: 1,092
do you want a Cold air? or Ram Air? cause the K&N isnt quite "cold air".... but it does work very well. i had it for 22k... just sold it for $60 (in perfect condition) to a member on here.... so there is some deals out there fo sho
08-05-2009, 11:28 PM
#9
6th Gear Member
Join Date: Mar 2007
Location: Chicago, IL
Posts: 6,169
What kind of intake are you using now if you got rid of the K&N?