full 3 inch cobra exhaust
#1
5th Gear Member
Thread Starter
Join Date: Sep 2006
Location: Northwest Ohio (Fort Wayne Area)
Posts: 4,760
full 3 inch cobra exhaust
does anyone know who makes a full 3 inch exhaust for the cobras i prefer bassani cat back which i have found but i can not find a 3 inch header/midpipe combo from the same company
#3
5th Gear Member
Thread Starter
Join Date: Sep 2006
Location: Northwest Ohio (Fort Wayne Area)
Posts: 4,760
i have seen stainless works has headers with 3 inch collectors but not sure what midpipe would work with those
http://dagostinoracing.com/index.php...oducts_id=9176
http://dagostinoracing.com/index.php...oducts_id=9176
#5
Kooks does like you already found out. IMO 3" is to much for our cars, idc how much boost you making, our motors are small. On another note I gained like 30 something rwhp/rwtq from doing my longtubes. ARH also makes a kit but you got to call them direct and order it. I like my ARHs because there a solid 1piece design where as the kooks use a slip fit by the collector and I've read alot of stories of them leaking.
#7
Similar to my set up.. I am running American Racing LTs with off Road X pipe and the Dynomax Ultra Flow 3 inch CB with Magnaflow 3.5 Tips.... Around town its mellow but at WOT you can hear me 2 counties away!
Thread
Thread Starter
Forum
Replies
Last Post