When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a 96 cobra SVT 61K miles. I recently put Autolite AP104 (platinum) plugs in her, along with new plug wires. The wires are Standard #6928. After the change, she idles at 900rpm, and just doesn't turn up the same. I'm thinking I should have left her alone. I may have a bad connection, but I did check by pulling plugs off while she was running, everything seemed fine. Can you help?
haha no your fine its the Throttle Positioning Sensor its directly to the front of your throttle body where you intake connects...its 2 screw to take it out and unlug the wire and throw a new on in its like 20 bucks and takes 5 min...takes longer to go to the parts store then it does to fix it
that is exactly what i thought it was.... haha! okay, so, i had to take all that stuff off to even get close to the plugs, i'll get right on it. thanks for your help, and nice ride!