Hey all, </P>


I'm new here, my name is Justin, i'm from Winnipeg Manitoba Canada, Although i do not currently own a mustang (used to own a 91 until the motor went) my buddy Rob has a 89LX with a 2.3L, we just put a new motor in it and #4 cylender DONT wanna fire, we've been pissin around with this thing for a day or so now after freshly dropping in a used motor, checked compression, its good, spark is good, not sure what it is, we used the injectors and wiring out of the old motor (intake and all) and it ran fine, this one just wont do nothing <IMG src=smileys/smiley7.gif border="0"><IMG src=smileys/smiley7.gif border="0"><IMG src=smileys/smiley7.gif border="0"></P>


</P>


Anyways, any tips or suggestions are welcome <IMG src=smileys/smiley4.gif border="0"></P>


</P>


Thanks! ---- Justin</P><edited><editID>89_LX_POS</editID><editDate>37777.885150463</editDate></edited>

 

make sure that injector is firing. thats all it could be if compression is good and it has spark to that cyl.

 

Yeah, I can't think if anything else it could be....