V6 (1994-2004) Mustangs Technical discussions on the 3.8L and 3.9L V6 torque monsters

new egde vs SN-95

Thread Tools
 
Search this Thread
 
Old Dec 4, 2006 | 12:56 PM
  #1  
crysalis_01's Avatar
crysalis_01
Thread Starter
Banned!
 
Joined: Aug 2006
Posts: 751
From: Wyoming isn't real
Default new egde vs SN-95

I was wondering what the stock hp rating is for the new edge. a friend of mine bought a '02 vert v6 a few weeks ago and decided he wanted to race. I said what the hell, we plotted out a 1/4 and lined up. He beat me off the line but about half way i caught him and won by about half my car. I was under the impression that the new edge had a bit more push than what a simple CAI and UDP could overcome.
Old Dec 4, 2006 | 01:01 PM
  #2  
Jefferson's Avatar
Jefferson
Moderator
 
Joined: Jun 2005
Posts: 3,557
Default RE: new egde vs SN-95

Sn-95:

3.8L 150 hp V6
150 @ 4000 RPM
215 @ 2750 RPM


Edge:

3.8L 190 hp V6
190 @ 5250 RPM
220 @ 2750 RPM


Both stick?

Maybe you friend sucks at driving.
Old Dec 4, 2006 | 01:08 PM
  #3  
crysalis_01's Avatar
crysalis_01
Thread Starter
Banned!
 
Joined: Aug 2006
Posts: 751
From: Wyoming isn't real
Default RE: new egde vs SN-95

Both auto. and his has about 150,000 miles less than mine. I don't know maybe it was just a fluke? but we did go twice, the first time we couldn't tell who took it so we ran again and well i already told the outcome of that.
Old Dec 4, 2006 | 01:19 PM
  #4  
Stang562's Avatar
Stang562
4th Gear Member
 
Joined: Dec 2005
Posts: 1,013
From: Whittier,CA
Default RE: new egde vs SN-95

maybe you're friend it was Ford's fluke and he has a singleport instead of the split port...

seriously though he should have gotten you but nice kill either way
Old Dec 4, 2006 | 01:25 PM
  #5  
mustangman02232's Avatar
mustangman02232
6th Gear Member
 
Joined: Dec 2004
Posts: 15,865
From: Ludlow, Mass
Default RE: new egde vs SN-95

umm, sounds like he shut down early, yours is 145/215 his is 193/225[&:]
Old Dec 4, 2006 | 01:28 PM
  #6  
Stang562's Avatar
Stang562
4th Gear Member
 
Joined: Dec 2005
Posts: 1,013
From: Whittier,CA
Default RE: new egde vs SN-95


ORIGINAL: mustangman02232

umm, sounds like he shut down early, yours is 150/215 his is 190/225[&:]
fixed
Old Dec 4, 2006 | 01:30 PM
  #7  
mustangman02232's Avatar
mustangman02232
6th Gear Member
 
Joined: Dec 2004
Posts: 15,865
From: Ludlow, Mass
Default RE: new egde vs SN-95


ORIGINAL: Stang562


ORIGINAL: mustangman02232

umm, sounds like he shut down early, yours is 150/215 his is 190/225[&:]
fixed
no

94-97 145/215
98 150/215

99-00 190/220
01-04 193/225

05-07 210/230
Old Dec 4, 2006 | 01:33 PM
  #8  
Stang562's Avatar
Stang562
4th Gear Member
 
Joined: Dec 2005
Posts: 1,013
From: Whittier,CA
Default RE: new egde vs SN-95

yes 94-95 145hp
but in 96 they upped it to 150hp
as for the 193hp I always thought they where only the 3.9s.... oh well
Old Dec 4, 2006 | 01:37 PM
  #9  
mustangman02232's Avatar
mustangman02232
6th Gear Member
 
Joined: Dec 2004
Posts: 15,865
From: Ludlow, Mass
Default RE: new egde vs SN-95


ORIGINAL: Stang562

yes 94-95 145hp
but in 96 they upped it to 150hp
as for the 193hp I always thought they where only the 3.9s.... oh well
no it wasnt until 98 when they uped it, the 3.9s are the same as teh 3.8s 193/225, supposedly dynos will read slightly more torque but ive never seen one dyno
Old Dec 4, 2006 | 01:45 PM
  #10  
Stang562's Avatar
Stang562
4th Gear Member
 
Joined: Dec 2005
Posts: 1,013
From: Whittier,CA
Default RE: new egde vs SN-95

Click I've read everywhere that they did go up in 96 by 5 , even here on our own forums. As for the 99-04s it says they had 193 since 99... go figure[sm=headbang.gif]



All times are GMT -5. The time now is 11:35 PM.