Titan Stroker Motors
Been looking to upgrade my 1997 single port to a split port. In my
searches and also talking with SSM and Morana it's best that I don't crack open my 136K motor, as most likely would wind up tearing it back down anyway. So question is anyone outside of the jeep community have any experience with these motors? I'm not looking add a S/C from the start but will be adding a ProCharger with about 6 or 7psi down the road. Sooo..first here is a link to the motor in question.. http://cgi.ebay.com/ebaymotors/High-...d=p3911.c0.m14 Would I be better to go this route with the extra torque of having a 4.3 or just get a rebuilt stock short block and put a power pack with a split port swap. I know a stock block can handle the ProCharger but just not sure if stroking this engine puts added stress. I know going forged would be the best solution, but I'm not interested in spending 7K for a motor. Insurance is about 1200 a year more for a GT and I already considered that, but I'd rather put the money into the V6 than my insurance agents pocket. Not changing the motor till after the winter. In the meantime going to upgrade the suspension, drop in an 8.8 and getting ready to do a Pypes Beast Sytem. I'm not a newbie to modding cars, just been out of it for many years now, so learning as I go. Last car I played with was a Vette in 89 and did a Lingenfelter set-up with nitrous. Prior to that I go back to my 396 Chevelle days and did a BB Vega as well. Carbs, dual points and solid lifters were cake for me, gotta learn the new stuff now. This car is for my daughter so I'm not looking to get that crazy, but she is getting really upset getting smoked by civics. Figure I'll do the motor first and if she stays out of trouble I'll add on the ProCharger. So..Any Thoughts on the motor in question.. |
i dont know about you but i dont trust anything from ebay. how much are you planning to spend
|
Originally Posted by 98ga00
(Post 6426670)
i dont know about you but i dont trust anything from ebay. how much are you planning to spend
Titans specialty and good things are said about their motors over there. As far as cost goes I'm trying to do the motor portion for about 3500 total. If I got a SSM powerpack for about 2 g's, and a reman short block for about 1200 I would be in the ballbark. So this motor for 2695 seems to be in the range. Yes I know if I built one myself I could save money but that isn't an option for me. |
There is no way in HELL i would pay close to 3k for that junk.
|
Originally Posted by ESG-642T
(Post 6427252)
There is no way in HELL i would pay close to 3k for that junk.
Not debating, as thats why I posted but what would make the Titan motor junk? I don't see not being forged as a reason, but any thing else? |
3k for ... an almost stock rebuilt 4.2L?
|
Buy an M90 for that single port. :D
|
Originally Posted by crysalis_01
(Post 6430057)
Buy an M90 for that single port. :D
just go with a ProCharger and run the stock motor till it goes. He said at that point I'll have a good idea of how much more I want when I do change out the engine.. Actually that would be the easiest solution. If I got another 10K miles with the blower I would consider, but no quarantee with 134 already on it. |
I was intrested in these engines. they clam to make 280 hp and 330 TQ. i had the email in my box but i cant find it. im just going to go with SSM. i heard bad things about delk and Tom Mornana
|
Delk is hit or miss lately. They do have some great history with the V6 Mustang, but SSM is top notch all around.
|
All times are GMT -5. The time now is 02:50 AM. |
© 2024 MH Sub I, LLC dba Internet Brands