yesterday and this morning when i was fabbing up my power steering delete bracket, i needed to remove the power steering pump pully and i didnt have the right tool so i figured id just ram some screw drivers in behind it and pry it off, well uh haha lessson learned it's a bad idea..




turns out the pully is NOT made of metal. so any of you planing to remove the pully make sure to use the proper tool

 

Yeah, it's plastic, you can "rent" the tool from any parts store. The lip on the center of the pulley is designed to facilitate removing it

 

yeah i know i've used it before, but i didnt have the $50 to "rent" it so i just tried to short cut it. good thing i was trashing it anyways