V6 (1994-2004) Mustangs Technical discussions on the 3.8L and 3.9L V6 torque monsters

windstar upper W/ WMS intake

Thread Tools
 
Search this Thread
 
Old 04-28-2010, 10:26 AM
  #1  
Leshrac
Thread Starter
 
Leshrac's Avatar
 
Join Date: Jun 2005
Location: West Virginia
Posts: 48
Default windstar upper W/ WMS intake?

Has anyone used the windstar upper intake with the WMS high velocity intake for the 05-08 stangs on their 3.8L? If so can you post some pics. If not does anyone know of any problems that might come with doing that?
http://www.wmsracing.com/wmsweb/product3.html (wms intake system)
http://www.vapauto.com/windstar.htm ( windstar kit)

Last edited by Leshrac; 04-28-2010 at 10:35 AM.
Leshrac is offline  
Old 04-28-2010, 10:51 AM
  #2  
Shaunmac9128
6th Gear Member
 
Shaunmac9128's Avatar
 
Join Date: Nov 2008
Location: RI
Posts: 5,453
Default

Looks like $300 for a flat filter? I don't see the advantage at all for that much money. Its like a ram air kit drawing hotter air from the engine bay when you can make the windstar intake tube so the filter is isolated in the fender-well.
Shaunmac9128 is offline  
Old 04-28-2010, 11:01 AM
  #3  
Leshrac
Thread Starter
 
Leshrac's Avatar
 
Join Date: Jun 2005
Location: West Virginia
Posts: 48
Default

I was gonna set it up like the v8 version, and get the parts from a junk yard and build the kit myself.
Leshrac is offline  
Old 04-28-2010, 11:08 AM
  #4  
Shaunmac9128
6th Gear Member
 
Shaunmac9128's Avatar
 
Join Date: Nov 2008
Location: RI
Posts: 5,453
Default

V8 version of what? I can build the windstar kit yourself. Some stuff might be easier to order prefabbed from vap. But I just don't see an advantage to putting the filter right infront of the tb in the hot engine bay, especially for $300.
Shaunmac9128 is offline  
Old 04-28-2010, 11:12 AM
  #5  
Leshrac
Thread Starter
 
Leshrac's Avatar
 
Join Date: Jun 2005
Location: West Virginia
Posts: 48
Default

http://www.wmsracing.com/wmsweb/product1564.html (v8 version)
Leshrac is offline  
Old 04-28-2010, 11:20 AM
  #6  
Shaunmac9128
6th Gear Member
 
Shaunmac9128's Avatar
 
Join Date: Nov 2008
Location: RI
Posts: 5,453
Default

Why is that $200 cheaper? And if your serious about drifting, you need to get into some more serious stuff than a ram air intake that will take 1 second off your 50-100 time because you'll never be going 50-100 drifting. I think the money could be better spent elsewhere, personally. Lowering intake temps is always good though.
Shaunmac9128 is offline  
Old 04-28-2010, 11:30 AM
  #7  
Leshrac
Thread Starter
 
Leshrac's Avatar
 
Join Date: Jun 2005
Location: West Virginia
Posts: 48
Default

dosnt the windstar intake up low end torque...and the second link is just for the box. I currently have a home made short ram sucking hot engine bay air anyhow.

Last edited by Leshrac; 04-28-2010 at 11:58 AM.
Leshrac is offline  
Old 04-28-2010, 12:14 PM
  #8  
rfcsoulja
2nd Gear Member
 
rfcsoulja's Avatar
 
Join Date: Sep 2007
Location: Oklahoma
Posts: 361
Default

^ How is that a ram air intake again?
rfcsoulja is offline  
Old 04-28-2010, 12:19 PM
  #9  
Shaunmac9128
6th Gear Member
 
Shaunmac9128's Avatar
 
Join Date: Nov 2008
Location: RI
Posts: 5,453
Default

Soulja you need to get that car to the track and see what it'll to with that nice list of mods. I'm really curious. And to op, your "homeade" intake is probably making less power than the stock setup. The windstar does help low end torque but once again I think you should be more concerned about your turbo setup and selectig the right turbo/setup for what you want.
Shaunmac9128 is offline  
Old 04-28-2010, 12:37 PM
  #10  
Leshrac
Thread Starter
 
Leshrac's Avatar
 
Join Date: Jun 2005
Location: West Virginia
Posts: 48
Default

but if I went ahead and turbo'd it now wouldnt it put too much stress on the stock internals with 75K miles on it?
Leshrac is offline  


Quick Reply: windstar upper W/ WMS intake



All times are GMT -5. The time now is 08:09 PM.