V6 (1994-2004) Mustangs Technical discussions on the 3.8L and 3.9L V6 torque monsters

Flywheel price quoted to me as rather high

Thread Tools
 
Search this Thread
 
Old May 9, 2011 | 05:50 PM
  #1  
Rich97's Avatar
Rich97
Thread Starter
 
Joined: Dec 2005
Posts: 23
Default Flywheel price quoted to me as rather high

My 1999 V6 Mustang needs among other things the flywheel replaced and the mechanic quoted me a price of $250 or so for the flywheel, over the phone, and that it would take 10 days for the shop to receive it as it is a "vintage" part. While speaking to him I did a search online and found one for under $100 shipped and asked him if I could email him the link. After his review of the part online he said he was unsure of it because sometimes when he calls a dealer rergarding a part the dealer will ask for the VIN (among other things)... I feel like I might be getting messed around here. Is a flywheel for a 1999 Mustang not a flywheel for a 1999 Mustang?

http://www.autopartswarehouse.com/de...S2NFW1175.html
Old May 9, 2011 | 05:52 PM
  #2  
Rich97's Avatar
Rich97
Thread Starter
 
Joined: Dec 2005
Posts: 23
Default

better link:

http://tinyurl.com/3wfnbv7
Old May 9, 2011 | 05:59 PM
  #3  
mustangman02232's Avatar
mustangman02232
6th Gear Member
 
Joined: Dec 2004
Posts: 15,865
From: Ludlow, Mass
Default

dealer is obviously going to charge you more, they need to make money to stay in buisness. was that installed
Old May 9, 2011 | 06:03 PM
  #4  
RyansQuick6's Avatar
RyansQuick6
Reverse Gear Member
 
Joined: Dec 2006
Posts: 8,130
From: Baton Rouge, LA
Default

Rockauto has them for $58. Amazon has it for $44, Autozone has it for $110. Find another mechanic, this one is either a moron or a liar. And this "vintage" part fits vehicles up to 2010.
Old May 9, 2011 | 06:22 PM
  #5  
Rich97's Avatar
Rich97
Thread Starter
 
Joined: Dec 2005
Posts: 23
Default

I just got a reply from him after sending him that link. He said that flywheel is not going to work.
Something fishy here?
Old May 9, 2011 | 06:23 PM
  #6  
Rich97's Avatar
Rich97
Thread Starter
 
Joined: Dec 2005
Posts: 23
Default

to make my question more clear, are there situations where this particular part would not work for my Mustang?
Old May 9, 2011 | 06:36 PM
  #7  
Fink's Avatar
Fink
5th Gear Member
 
Joined: Jan 2008
Posts: 3,306
From: Canada
Default

Mechanic is retarded... find a new one.
Old May 9, 2011 | 10:41 PM
  #8  
NeoTokyo's Avatar
NeoTokyo
6th Gear Member
 
Joined: Dec 2003
Posts: 6,524
From: Sacramento, CA
Default

He is trying to screw you over, let him know and be SURE to leave a review for him on Google so other people know he is trying to charge $200 ontop of what the part really costs.

Here are the specs
11.0 Flywheel
1 1/16" 10 spline shaft.
Old May 10, 2011 | 04:57 AM
  #9  
ESG-642T's Avatar
ESG-642T
Buyer Beware
 
Joined: Oct 2007
Posts: 3,586
Default

Originally Posted by Rich97

This thread @ lol

Of course that WILL NOT fit.
Old May 10, 2011 | 10:51 AM
  #10  
jthorn9's Avatar
jthorn9
The Godfather
 
Joined: Sep 2005
Posts: 15,480
From: Temple, Texas
Default

I can't view the link but go buy a flywheel from somewhere and bring it to a shop that offers the best price to be installed you will save a lot of money and headache that way. I bought my flywheel for my 5.0 on ebay and its darn good quality. It is two steps up from stock but definitely not bad. But as stated autozone as well as other places sell that flywheel. And there isn't much special about it as it was used for years.



All times are GMT -5. The time now is 06:03 PM.