first time turbo!!!
Thread Starter
Joined: Nov 2007
Posts: 41
From:
first time turbo!!!
hi everybody i just got a turbocharger (itself) and i knowi will need a lot more parts to instal it but i dont know what ALL other parts are necessary...any help!!!
heres what i got:
K27 turbocharger with 2.5" Inducer and 3 " Exducer
Hot and cold housings than standard K-26 type
heres what i got:
K27 turbocharger with 2.5" Inducer and 3 " Exducer
Hot and cold housings than standard K-26 type
Compressor Wheel : .63 A/R , IND: 49.15mm , Exd 80.84mm , Trim: 36.9
Turbiner Wheel : .87 A/R , Ind: 67.16mm , Exd: 78.85mm , Trim: 78.4mm
6 Bolt Downpipe Flange
and oil line kit:
oil Feed Line for turbo.
oil Feed Line for turbo.
6th Gear Member
Joined: Feb 2007
Posts: 8,540
From: South FL
RE: first time turbo!!!
So pretty much you need about $6000 worth of junk still:
All the piping, intercooler, a much larger fuel system, install and a tune.
What have to done already? You might need more than that still.
All the piping, intercooler, a much larger fuel system, install and a tune.
What have to done already? You might need more than that still.
Buyer Beware
Joined: Oct 2007
Posts: 3,586
RE: first time turbo!!!
ORIGINAL: LilRoush
So pretty much you need about $6000 worth of junk still:
All the piping, intercooler, a much larger fuel system, install and a tune.
What have to done already? You might need more than that still.
So pretty much you need about $6000 worth of junk still:
All the piping, intercooler, a much larger fuel system, install and a tune.
What have to done already? You might need more than that still.
6th Gear Member
Joined: Apr 2006
Posts: 5,010
From: Las Vegas
RE: first time turbo!!!
ORIGINAL: konjina
hi everybody i just got a turbocharger (itself) and i knowi will need a lot more parts to instal it but i dont know what ALL other parts are necessary...any help!!!
heres what i got:[align=center]
K27 turbocharger with 2.5" Inducer and 3 " Exducer
Hot and cold housings than standard K-26 type[/align][align=center]Compressor Wheel : .63 A/R , IND: 49.15mm , Exd 80.84mm , Trim: 36.9[/align][align=center]Turbiner Wheel : .87 A/R , Ind: 67.16mm , Exd: 78.85mm , Trim: 78.4mm[/align][align=center]6 Bolt Downpipe Flange
[/align][align=center]and oil line kit:
oil Feed Line for turbo.
[/align][align=center][/align]
hi everybody i just got a turbocharger (itself) and i knowi will need a lot more parts to instal it but i dont know what ALL other parts are necessary...any help!!!
heres what i got:[align=center]
K27 turbocharger with 2.5" Inducer and 3 " Exducer
Hot and cold housings than standard K-26 type[/align][align=center]Compressor Wheel : .63 A/R , IND: 49.15mm , Exd 80.84mm , Trim: 36.9[/align][align=center]Turbiner Wheel : .87 A/R , Ind: 67.16mm , Exd: 78.85mm , Trim: 78.4mm[/align][align=center]6 Bolt Downpipe Flange
[/align][align=center]and oil line kit:
oil Feed Line for turbo.
[/align][align=center][/align]
Thread Starter
Joined: Nov 2007
Posts: 41
From:
RE: first time turbo!!!
im european not bosnian thank god, but close (serbian)...but what the **** does that have to do with this. If i never had turbo how the hell am i suposed to know all about that.Its like you guys were born with turbos in your heads. See if i could aford Saleen i would buy one trust me, but i cant even aford a whole kit and thats why im gonna go part by part. And i didnt ask should i instal oneor no i just askedfor some tips from yousmartasses
. Its not like im gonna go drag racing, i just want a little faster V6, for now!
. Its not like im gonna go drag racing, i just want a little faster V6, for now!
6th Gear Member
Joined: Feb 2007
Posts: 8,540
From: South FL
RE: first time turbo!!!
We say stuff like that because you clearly need to go read up about turbo charging mustangs LONG before you just go out and buy a compressor unit. Take step #1, then take the rest.