V6 General Discussion This section is for non-tech specific information pertaining to V6 Mustangs.

As Promised...

Thread Tools
 
Search this Thread
 
Old May 4, 2011 | 03:28 PM
  #1  
fearthisinc's Avatar
fearthisinc
Thread Starter
3rd Gear Member
 
Joined: Aug 2005
Posts: 537
From: New Jersey
Default As Promised...

Wheels are finally on the car.. Took them to another shop to balance them out.. Turns out that even WITH all those weights the tires were still not balanced.. the guy put them on the balancer before doign anything and it turned out that 3 out of the 4 were not balanced.. so at least thats taken care of.. you may also notice that the headlights were replaced.. i had the smoke headlights which looked great but at night they gave off some weird color when the headlights shined through.. so i went and got the crystal black headlights.. still look good in my opinion.. anyway.. here are the pics..





Old May 4, 2011 | 03:38 PM
  #2  
stangant's Avatar
stangant
5th Gear Member
 
Joined: Jan 2007
Posts: 2,697
From: Titusville, Fl
Default

very nice. It's to bad american muscle let you down like that.
Old May 4, 2011 | 04:16 PM
  #3  
brent4's Avatar
brent4
4th Gear Member
 
Joined: May 2007
Posts: 1,605
From: North Carolina
Default

Looks very nice..
Old May 4, 2011 | 04:25 PM
  #4  
NeoTokyo's Avatar
NeoTokyo
6th Gear Member
 
Joined: Dec 2003
Posts: 6,524
From: Sacramento, CA
Default

wow, that really sucks that they have such poor standards for alignment.
Well at least they paid to have them re-done.

Great looking Saleen Reps btw, those Bullitt calipers look great behind them, headlights are clean too.
Old May 5, 2011 | 12:20 AM
  #5  
cominus's Avatar
cominus
5th Gear Member
 
Joined: Dec 2006
Posts: 2,223
From: North Carolina
Default

I'll only say it once. LOWER
Old May 5, 2011 | 02:38 AM
  #6  
ESG-642T's Avatar
ESG-642T
Buyer Beware
 
Joined: Oct 2007
Posts: 3,586
Default

Yep... Needs lower then it'll be a 9 instead of a 7 :P
Old May 5, 2011 | 07:38 AM
  #7  
fearthisinc's Avatar
fearthisinc
Thread Starter
3rd Gear Member
 
Joined: Aug 2005
Posts: 537
From: New Jersey
Default

yea im looking into doing something.. the problem is that the roush kit lowers the car a bit.. i had the eibach kit on the car and the side skirts almost hit the ground and i was bottoming out everywhere.. so i dont know what im going to do.. i have thought about dropping just the front but i have to see how it will work out..
Old May 5, 2011 | 08:34 AM
  #8  
stangant's Avatar
stangant
5th Gear Member
 
Joined: Jan 2007
Posts: 2,697
From: Titusville, Fl
Default

get the corresponding roush lowering kit, looks like it will work well. That kit lowers the car 1" in the front and .8" in the rear which does not sound like much but really is. I may have reversed the measurements but either way it is about even.

Last edited by stangant; May 5, 2011 at 08:38 AM.
Old May 5, 2011 | 08:44 AM
  #9  
Martinarcher64's Avatar
Martinarcher64
2nd Gear Member
 
Joined: Aug 2010
Posts: 160
From: PA
Default

Looks great! I'm digging the silver/black theme.
Old May 5, 2011 | 03:55 PM
  #10  
Fink's Avatar
Fink
5th Gear Member
 
Joined: Jan 2008
Posts: 3,306
From: Canada
Default

Did you always have a cowl hood? Rims look good. they arent staggered are they?



All times are GMT -5. The time now is 09:20 AM.