Tubra

I am trying to find out where I can get a drivers side midpipe to run duals, I want the shop to fab an H, but not the mid. ARGHHH

28HopUp

Bought mine from my friendly Ford parts counter sales clerk for around $100. Not cheap, but I knew it was gonna fit properly over the axle

tilt

My muffler shop was able to order me one for $80, but otherwise go to a ford dealer. They wont be able to fab for less.

JimC

I found several on Ebay so you might want to check that out.

bulldawg

check with your local magnaflow dealer pepboys autozone etc the new walker/dynomax catalog has an x pipe and all others for our car will be like 168 for the x and driverside pipe.

Tubra

thx guys!

damquick1

HMMNNN too bad I just sold mine to silstang for 25 Bucks, however I do still have to GT takeoff mufflers I'll let go for 30 bucks if anyone needs them.

Trmachuno

Start a thread damquick on the mufflers so they'll sell quicker!

Torch_Vert

I don't recommend going with the Walker/Dynomax. I bought one. It wasn't bent right (hangs about 4" lower than it should in front of the axle). I ended up yanking it and going with a Ford pipe.

Bend quality was total crap too (lots of kinks). I wouldn't go with their aluminizedX either. Get the stainless one from Pypes.

ODDYSEY

brand new GT drivers side mid pipe is $126 from Ford directly.