MustangForums.com
I think she likes it ..... :)
I think she likes it ..... :)
0 2013/08/09 19:55:47
First wash job after purchase ..... our 2008 Mustang GT 5spd, 21,900 miles.
First wash job after purchase ..... our 2008 Mustang GT 5spd, 21,900 miles.
0 2013/08/09 19:55:47
Clean enough I think
Clean enough I think
0 2013/08/09 20:01:09
Love these wheels, with stock 235/55-17 rubber.... .... I have some Goodyear Eagle RS-A tires for future.
Love these wheels, with stock 235/55-17 rubber.... .... I have some Goodyear Eagle RS-A tires for future.
0 2013/08/09 20:01:09
Gets better mileage in our driving than expected
Gets better mileage in our driving than expected
0 2013/08/09 20:09:28
Now she has her tags back ....
Now she has her tags back ....
0 2013/08/09 20:09:28
092813 Rocky Knob on BRP ... stripes are on.
092813 Rocky Knob on BRP ... stripes are on.
0 2013/09/28 22:44:56
092813 also at Rocky Knob on BRP.
092813 also at Rocky Knob on BRP.
0 2013/09/28 22:44:56
092813 evening at mm 171 BRP
092813 evening at mm 171 BRP
0 2013/09/28 22:44:56
Rear coils now 13-7/16" long overall after cut those cutoff parts from top ends and gently rounded / smoothed the ends ... then painted.
Rear coils now 13-7/16" long overall after cut those cutoff parts from top ends and gently rounded / smoothed the ends ... then painted.
0 2013/10/18 17:14:53
101813 I lowered the rear to match front at 28-1/4" arch top. Rear arch tops were 29-3/8" from carport before. I also have exactly 1/4" gap from tire sidewall at top to straight edge from fender to bulge at 33 psi, my wheels have deeper set.
101813 I lowered the rear to match front at 28-1/4" arch top. Rear arch tops were 29-3/8" from carport before. I also have exactly 1/4" gap from tire sidewall at top to straight edge from fender to bulge at 33 psi, my wheels have deeper set.
0 2013/10/18 17:14:53
101813 I lowered the rear
101813 I lowered the rear
0 2013/10/18 17:14:53
This is my Hurst Billet shifter with my own extension to extend handle and angle back. It's in 3rd gear here.
This is my Hurst Billet shifter with my own extension to extend handle and angle back. It's in 3rd gear here.
0 2013/10/18 17:30:05
This is 4th gear with my extended lever. Total 3rd to 4th is 2-5/8" travel at center of ball.
This is 4th gear with my extended lever. Total 3rd to 4th is 2-5/8" travel at center of ball.
0 2013/10/18 17:31:38
101813 rom front right after I lowered rear just over an inch.
101813 rom front right after I lowered rear just over an inch.
0 2013/10/18 17:36:53
"Wife Unit" decided "yes" on the hood scoop question, American Muscle shipped it and I did the install. Looks pretty good IMHO, she certainly likes it.
"Wife Unit" decided "yes" on the hood scoop question, American Muscle shipped it and I did the install. Looks pretty good IMHO, she certainly likes it.
0 2014/03/25 18:26:12
Also removed the Putco tail lamp trim that was on it when we purchased the car and installed new MMD Trim from AM as well ..... and I added some new 3.75" diameter tips with rolled edges.
Also removed the Putco tail lamp trim that was on it when we purchased the car and installed new MMD Trim from AM as well ..... and I added some new 3.75" diameter tips with rolled edges.
0 2014/03/25 18:26:12
092014 at house befor dinner ride
092014 at house befor dinner ride
0 2014/10/03 18:07:56
092914 Mustang @ Meem's Bottom Bridge parking
092914 Mustang @ Meem's Bottom Bridge parking
0 2014/10/03 18:07:56
092914 Mustang parked in front of Southern Kitchen, New Market, Va.
092914 Mustang parked in front of Southern Kitchen, New Market, Va.
0 2014/10/03 18:07:56