Agent47 Double Barrel Strut Tower Brace
11-20-2010, 09:00 AM
#16
Cut & Paste Expert
Join Date: May 2007
Location: NW Arkansas
Posts: 13,322
If the center 'bat' was removable with no
remnants of being there, that would be one nice grill..
Here is a good three point brace
for the ultimate in function and form.
remnants of being there, that would be one nice grill..
Here is a good three point brace
for the ultimate in function and form.
Last edited by 157dB; 11-20-2010 at 09:04 AM.
11-20-2010, 09:24 AM
#17
Former Sponsor
Thread Starter
Join Date: Sep 2007
Posts: 2,204
Agent47 Mustang Parts
Ken
Last edited by southernmustangparts; 11-20-2010 at 09:27 AM.
11-23-2010, 09:15 PM
#18
Former Sponsor
Thread Starter
Join Date: Sep 2007
Posts: 2,204
Agent 47 Double Barrel Strut Tower Brace
2005-2009 Mustang GT (With Plenum Cover or Supercharger)
Free Shipping in the United States through 12/31
$249.00
This brace is very similar to the standard GT brace in that is uses chromoly tubes Tig welded to CR steel boxed structures. It is different because it uses two smaller 1” chromoly tubes bent for maximum clearance over the engine.
These boxes use all four bolts on the tower to mount the brace solidly(no joints to pivot).
One look at one of these braces and you will see the design, fit, welds, and finish are second to none. They come in a black powdercoat and install time is less than 15 minutes.
Check them out at www.southernmustangparts.com or just click below
Agent47 Strut Tower Brace
Ken
2005-2009 Mustang GT (With Plenum Cover or Supercharger)
Free Shipping in the United States through 12/31
$249.00
This brace is very similar to the standard GT brace in that is uses chromoly tubes Tig welded to CR steel boxed structures. It is different because it uses two smaller 1” chromoly tubes bent for maximum clearance over the engine.
These boxes use all four bolts on the tower to mount the brace solidly(no joints to pivot).
One look at one of these braces and you will see the design, fit, welds, and finish are second to none. They come in a black powdercoat and install time is less than 15 minutes.
Check them out at www.southernmustangparts.com or just click below
Agent47 Strut Tower Brace
Ken
Thanks!
Ken
12-11-2010, 05:36 PM
#19
Former Sponsor
Thread Starter
Join Date: Sep 2007
Posts: 2,204
Agent 47 Double Barrel Strut Tower Brace
2005-2009 Mustang GT (With Plenum Cover or Supercharger)
Free Shipping in the United States through 12/31
$249.00
This brace is very similar to the standard GT brace in that is uses chromoly tubes Tig welded to CR steel boxed structures. It is different because it uses two smaller 1” chromoly tubes bent for maximum clearance over the engine.
These boxes use all four bolts on the tower to mount the brace solidly(no joints to pivot).
One look at one of these braces and you will see the design, fit, welds, and finish are second to none. They come in a black powdercoat and install time is less than 15 minutes.
Check them out at www.southernmustangparts.com or just click below
Agent47 Strut Tower Brace
Ken
2005-2009 Mustang GT (With Plenum Cover or Supercharger)
Free Shipping in the United States through 12/31
$249.00
This brace is very similar to the standard GT brace in that is uses chromoly tubes Tig welded to CR steel boxed structures. It is different because it uses two smaller 1” chromoly tubes bent for maximum clearance over the engine.
These boxes use all four bolts on the tower to mount the brace solidly(no joints to pivot).
One look at one of these braces and you will see the design, fit, welds, and finish are second to none. They come in a black powdercoat and install time is less than 15 minutes.
Check them out at www.southernmustangparts.com or just click below
Agent47 Strut Tower Brace
Ken
$189.99 with coupon code MustangForum
Check them out at www.southernmustangparts.com
Ken
12-11-2010, 06:12 PM
#20
5th Gear Member
Join Date: Mar 2008
Location: Kansas City
Posts: 2,201
I'm sorry but that is way too pricey for a non carbon fiber strut bar. I know agent47 makes a quality product and I'm sure you probably have the best price....but over $250 for a strut brace? thats bmw part pricing