Quarter Window Louvers from AM

Reply Subscribe

Thread Tools

Search this Thread

04-25-2011, 10:55 AM

#31

MeanStang08

ChopShop Mod-tator

Join Date: Mar 2008

Location: Kaintucke

Posts: 2,147

Quote:

Originally Posted by kevinmalec

Well, 3M double sided sticky tape is coming off in certain areas on both louvers. I should have went with my gut and purchased the stronger 3M tape from Home Depot!! I am kicking myself for not doing so! Now, I have to remove the louvers and re-do.

did you use surface prep 94 (3m Tape Primer) ?

04-25-2011, 12:33 PM

#32

kevinmalec

5th Gear Member

Thread Starter

Join Date: Apr 2008

Location: Acworth, GA

Posts: 3,666

Quote:

Originally Posted by MeanStang08

did you use surface prep 94 (3m Tape Primer) ?

I used the adhesive promoter packs, alchohol packs and 3M tape provided by AM. They all came with the louvers.

04-25-2011, 02:15 PM

#33

MeanStang08

ChopShop Mod-tator

Join Date: Mar 2008

Location: Kaintucke

Posts: 2,147

Quote:

Originally Posted by kevinmalec

I used the adhesive promoter packs, alchohol packs and 3M tape provided by AM. They all came with the louvers.

hmm.. dunno if thats the same stuff or not..

04-27-2011, 03:50 PM

#34

BLACK05STANGER

Join Date: Sep 2007

Location: Illinois

Posts: 27

Just got mine from AM for my Black GT...Thanks for the advice and not only do I hope I dont have the same issues, but they look as good as your Kevin...

04-28-2011, 08:03 AM

#35

kevinmalec

5th Gear Member

Thread Starter

Join Date: Apr 2008

Location: Acworth, GA

Posts: 3,666

Quote:

Originally Posted by BLACK05STANGER

Just got mine from AM for my Black GT...Thanks for the advice and not only do I hope I dont have the same issues, but they look as good as your Kevin...

Thanks! Word of advice, if I had to do it all over again, I would have bought the super duty 3M tape from Home Depot and used it instead of the tape provided. It seems to have fixed the front corner. Tip: I used the box that the louvers came in and traced around the louver and cut out a template. I positioned the template on the car and then marked off with painters tape. Good luck!

Last edited by kevinmalec; 04-28-2011 at 08:08 AM.