CHARGE-motion plates
#2
RE: CHARGE-motion plates
Any engine guru:
Adding 35 hp with pulleys, CAI, removing flappers and reprogramming is awesome - but I'd like to know the costs prior (aside from the $$$).
I've looked back and didn't see a full explanation from anyone as to any negative aspects of taking the flappers out.
I thought the purpose of the variable flapper was to provide more lower end torque by similating a longer intake flow into the engine.
It seems like taking them out will provide a little more low end HP but wouldn't that have a cost - torque mainly?
I'm just wondering what the trade off is, as nothing is free. (too bad they don't have the dyno curves for each piece added incrementally)
If it's been answered before I apologize...
Also, does anyone know of any harmonic problems or any others with the pulleys?
thanks!
Chip
Adding 35 hp with pulleys, CAI, removing flappers and reprogramming is awesome - but I'd like to know the costs prior (aside from the $$$).
I've looked back and didn't see a full explanation from anyone as to any negative aspects of taking the flappers out.
I thought the purpose of the variable flapper was to provide more lower end torque by similating a longer intake flow into the engine.
It seems like taking them out will provide a little more low end HP but wouldn't that have a cost - torque mainly?
I'm just wondering what the trade off is, as nothing is free. (too bad they don't have the dyno curves for each piece added incrementally)
If it's been answered before I apologize...
Also, does anyone know of any harmonic problems or any others with the pulleys?
thanks!
Chip
#3
RE: CHARGE-motion plates
some where in here it wasa previously posted. some one mentioned that the sean hyland motorsports pulleys were the closest thing to stock. but were still a very good high proformance pulley kit that didn't really effect harmonic's to drastically. here is the link
http://www.seanhylandmotorsport.com/...stang_gt.shtml
http://www.seanhylandmotorsport.com/...stang_gt.shtml
#4
RE: CHARGE-motion plates
has any one installed one of these on there stangs yet? i want to know how long it takes the details how hard it is to do and what i might be in for if any one has any info on the instalation of the charge motion plate for the GT please SHARE YOUR KNOWLEDGE!
#5
RE: CHARGE-motion plates
ORIGINAL: silverbullit05
has any one installed one of these on there stangs yet? i want to know how long it takes the details how hard it is to do and what i might be in for if any one has any info on the instalation of the charge motion plate for the GT please SHARE YOUR KNOWLEDGE!
has any one installed one of these on there stangs yet? i want to know how long it takes the details how hard it is to do and what i might be in for if any one has any info on the instalation of the charge motion plate for the GT please SHARE YOUR KNOWLEDGE!
#6
RE: CHARGE-motion plates
thanks td1320 for the help i got off the phone with steeda yesterday and they are sending me the flash up date for my predator. can't wait to see what kind of diffrence this MOD will have on my every day driving.
#7
RE: CHARGE-motion plates
ORIGINAL: silverbullit05
thanks td1320 for the help i got off the phone with steeda yesterday and they are sending me the flash up date for my predator. can't wait to see what kind of diffrence this MOD will have on my every day driving.
thanks td1320 for the help i got off the phone with steeda yesterday and they are sending me the flash up date for my predator. can't wait to see what kind of diffrence this MOD will have on my every day driving.
#10
RE: CHARGE-motion plates
Got them in on friday night. I can tell the difference in the pick up on 3-4 gear. did put in the flywheel and 4:10 gears also, but she didnt seem lagging at the higher speeds like she did before. If you look at the factory one they were really restricted. if you like running fast then I would get them. Just my opinion I could be wrong.
Thread
Thread Starter
Forum
Replies
Last Post
maestro1024
Classic Mustangs (Tech)
6
09-21-2015 02:40 PM