adhesion promoter
05-21-2008, 07:35 PM
#11
5th Gear Member
Join Date: Feb 2005
Location: Anaheim, California
Posts: 4,205
RE: adhesion promoter
LOL..... +1
ORIGINAL: mygt500
Its funny you mention that because I did not use it for the pedals either just for everything on the outside of the car!
Its funny you mention that because I did not use it for the pedals either just for everything on the outside of the car!
ORIGINAL: mlcrycc
All of the above is good info. But I will tell you that when I applied my pedals, I merely cleaned the gas pedal very well with rubbing alcohol. Applied the pedal, and put a thick rubber band around it for about 12 hours or so. The pedals have been on for probably a year and a half, and I have had zero issues.
Mike
I've never had to use promoter before, is it just due to the material of the stock pedal that it needs to
be used to get a good bond?
be used to get a good bond?
Mike
05-21-2008, 08:21 PM
#12
4th Gear Member
Join Date: Oct 2007
Location: Harrisburg PA
Posts: 1,778
RE: adhesion promoter
I don't have the CDC pedals, different brand. They have countersunk holes for screws. I just drilled holes in the stock gas pedal, filled them with epoxy and then screwed the pedals on. The pedal is on there for good now. drawback is I can never take it off. Good thing is I never have to worry about it moving or falling off in "the heat of battle".
05-21-2008, 09:21 PM
#13
2nd Gear Member
Thread Starter
Join Date: Mar 2008
Location: New Hampshire
Posts: 305
RE: adhesion promoter
Thanks. I'll at least look for the adhesion promoter, and if I completely fail, maybe won't
bother.. I figured I'd clamp it down overnight, I have plenty of clamps.
05-21-2008, 10:02 PM
#14
5th Gear Member
Join Date: Mar 2006
Location: Nor Cal
Posts: 2,179
RE: adhesion promoter
If your interested send me your name and address. I have one of the small packets with the little foam sponge of adhesion promoter and I would be more than willing to mail it to you and it should be plenty for your need.
05-22-2008, 08:22 AM
#16
2nd Gear Member
Thread Starter
Join Date: Mar 2008
Location: New Hampshire
Posts: 305
RE: adhesion promoter
06GT,
Thanks for the offer! I'm going to head to an auto parts store near work, and a HUGE HW store if I can't find it there.
If those come up bust, I may take you up on it.
Thanks!
05-22-2008, 11:47 AM
#18
Cut & Paste Expert
Join Date: May 2007
Location: NW Arkansas
Posts: 13,322
RE: adhesion promoter
eBay.
3M 4298 Adhesion Promoter.
http://cgi.ebay.com/ebaymotors/Autom...spagenameZWD1V
Wood dash trim adhesion promoter.
http://cgi.ebay.com/ebaymotors/ADHES...spagenameZWD1V
[IMG]local://upfiles/69445/981FAB56FFD149ABA7BA965EE8AB241E.jpg[/IMG]
3M 4298 Adhesion Promoter.
http://cgi.ebay.com/ebaymotors/Autom...spagenameZWD1V
Wood dash trim adhesion promoter.
http://cgi.ebay.com/ebaymotors/ADHES...spagenameZWD1V
[IMG]local://upfiles/69445/981FAB56FFD149ABA7BA965EE8AB241E.jpg[/IMG]
05-22-2008, 03:05 PM
#20
4th Gear Member
Join Date: Feb 2007
Location: Northern Virginia
Posts: 1,459
RE: adhesion promoter
I put on my pedals w/o the promoter. If it falls off, at least it isn't falling off onto
the road and being lost or anything. On the outside of the car, I did use adhesion
promotor though. Mine came with my chin spoiler but it had enough to do my side
scoops and rear spoiler also.
the road and being lost or anything. On the outside of the car, I did use adhesion
promotor though. Mine came with my chin spoiler but it had enough to do my side
scoops and rear spoiler also.
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
MustangJourney
V6 S197 General Discussion
1
09-02-2015 04:32 PM
