Post your MODIFIED S197 Mustang!!!! Bragging thread>>
#1722
Was a 3.7 V6/auto. Now:
- 427 windsor (Dart block, forged rotating assy, 10.5:1, Trickflow roller cam, AFR 205 heads, Edelbrock intake, QuickFuel Q850 carb, Accufab headers, ARP fasteners)
- 439 RWHP, 454RWTQ (Mustang in-floor dyno), 505 crank HP
- Accesssories (alternator, A/C, power steering pump) and brackets from a fox body
- Hydraulic power steering rack from 2009 Mustang
- Tremec Magnum XL 6spd
- Max Motorsports caster/camber plates
- Koni shocks/struts
- DUB springs
- Boss 302 SLA front LCA
- Eibach sway bars
- BMR UCA
- Cortex watts link
- Slotted/dimpled brake rotors
- Max Motorsports 4-point roll bar
- RACEQUIP racing harnesses
Still to do:
- Supersnake strut tower brace (if I can find one)
- Wilwood brakes
- Racing seats
- Paint refresh
Last edited by jsimmonstx; 04-09-2015 at 05:37 AM.
#1723
427W S197 Idling - YouTube
Was a 3.7 V6/auto. Now:
- 427 windsor (Dart block, forged rotating assy, 10.5:1, Trickflow roller cam, AFR 205 heads, Edelbrock intake, QuickFuel Q850 carb, Accufab headers, ARP fasteners)
- 439 RWHP, 454RWTQ (Mustang in-floor dyno), 505 crank HP
- Accesssories (alternator, A/C, power steering pump) and brackets from a fox body
- Hydraulic power steering rack from 2009 Mustang
- Tremec Magnum XL 6spd
- Max Motorsports caster/camber plates
- Koni shocks/struts
- DUB springs
- Boss 302 SLA front LCA
- Eibach sway bars
- BMR UCA
- Cortex watts link
- Slotted/dimpled brake rotors
- Max Motorsports 4-point roll bar
- RACEQUIP racing harnesses
Still to do:
- Supersnake strut tower brace (if I can find one)
- Wilwood brakes
- Racing seats
- Paint refresh
Was a 3.7 V6/auto. Now:
- 427 windsor (Dart block, forged rotating assy, 10.5:1, Trickflow roller cam, AFR 205 heads, Edelbrock intake, QuickFuel Q850 carb, Accufab headers, ARP fasteners)
- 439 RWHP, 454RWTQ (Mustang in-floor dyno), 505 crank HP
- Accesssories (alternator, A/C, power steering pump) and brackets from a fox body
- Hydraulic power steering rack from 2009 Mustang
- Tremec Magnum XL 6spd
- Max Motorsports caster/camber plates
- Koni shocks/struts
- DUB springs
- Boss 302 SLA front LCA
- Eibach sway bars
- BMR UCA
- Cortex watts link
- Slotted/dimpled brake rotors
- Max Motorsports 4-point roll bar
- RACEQUIP racing harnesses
Still to do:
- Supersnake strut tower brace (if I can find one)
- Wilwood brakes
- Racing seats
- Paint refresh
Any plans for the rear-deck lid badge?
#1724
My primary thought is a Cobra with 427 on the left and "Power By Ford" (using a Ford emblem) on the right, and then paint the "FORD" in the cap and the recessed ring Guardsman blue to match the stripes.
My second idea was to do a Terlingua bunny with the text "Terlingua Racing Team 427" around the perimeter of the bunny image.
#1725
I have some ideas, but those faux caps are damned expensive for what they are, and I'd like to make a couple different ones.
My primary thought is a Cobra with 427 on the left and "Power By Ford" (using a Ford emblem) on the right, and then paint the "FORD" in the cap and the recessed ring Guardsman blue to match the stripes.
My second idea was to do a Terlingua bunny with the text "Terlingua Racing Team 427" around the perimeter of the bunny image.
My primary thought is a Cobra with 427 on the left and "Power By Ford" (using a Ford emblem) on the right, and then paint the "FORD" in the cap and the recessed ring Guardsman blue to match the stripes.
My second idea was to do a Terlingua bunny with the text "Terlingua Racing Team 427" around the perimeter of the bunny image.
#1729
..... Man you just never know who you might meet on one of these internet sites.
That's funny as I can actually envision someone saying and asking you that.
It's going to be interesting to me to 1-day see and read what you end up with in regards to another Mustang.
Any thoughts you care to share on that subject Big-Guy
Terry
#1730
Jim,
..... Man you just never know who you might meet on one of these internet sites.
That's funny as I can actually envision someone saying and asking you that.
It's going to be interesting to me to 1-day see and read what you end up with in regards to another Mustang.
Any thoughts you care to share on that subject Big-Guy
Terry
..... Man you just never know who you might meet on one of these internet sites.
That's funny as I can actually envision someone saying and asking you that.
It's going to be interesting to me to 1-day see and read what you end up with in regards to another Mustang.
Any thoughts you care to share on that subject Big-Guy
Terry