sneakypeter11

I think what he's talking about is when the bumper cover has a gap between it and the grille surround. This has been discussed earlier in the thread. I had this issue along with many others. It had nothing to do with anything being loose, it just seemed to happen. The simple fix was to take off the plastic radiator cover, rip up some cardboard pieces, and stuff them under the top of the bumper cover from the inside (under the hood). This will shim up the top of the bumper and reduce the gap between the cover and the grille surround.

As for the fogs, there are screws on the back of them that can be turned to adjust the aim up or down. If I remember correctly it was a torx, but maybe just an allen. Just be careful not to adjust them up too high because what may give you the best visibility is most likely blind a car coming at you from a couple hundred feet away.

Hope this was helpful.

Phantomx2

I still have the factory grill since I am using the factory grill fogs. I dont notice any gap between the bumper and the grill surround. I notice the gap between the bumper and the bottom of the headlights. Ill call up the shop and see if they can take a look.

3.7KonaBlue

I have a 2012 v6 mustang and i want to mod the front out also. But i am not sure about the stuff i need.

I know i need the gt front bumper, and the Lower Grille Fascia http://www.partscheap.com/2011-2012-...z-15200-aa.htm BR3Z-15200-AA , and i want the saleen grille or the roush but do i need a surrounder to make it fit. I also read somewhere that the saleen grille is plastic if it is then i would want the roush unless that is plastic to then ill stick with the saleen grille. Please let me know every thing i need to do the mod and part #'s and links to the products will be great.

markkk

i agree, im on the same page and don't know if i need the surround for the saleen or not

drewzx3

saleen is the whole grille

3.7KonaBlue

I decided that im going with the roush because its not plastic and i like it more because it doesnt have the big gaps in between each bar. So will i need a gt surrounder for that if so what is the part number because im planning on ordering when i find out everything i need for it for sure

v6motorheadftop

anyone tell me what bulb number these have? I'm ordering HIDs and I am too lazy to take the lower cover off to check lol. It's either a 914 or h11 I believe

Siber Express

They are H11's

drewzx3

When they pull up the part number does it show up as bumPer repair kit of something like that?