These mods + 1/4 = ETA of??
05-10-2006, 02:39 AM
#11
4th Gear Member
Join Date: May 2005
Location: New York
Posts: 1,648
RE: These mods + 1/4 = ETA of??
ORIGINAL: xxkazp3rxx
Steeda 4.6L Underdrive Pulleys, JLT CAI, SLP X-Pipe with cats and an SLP Loudmouth Catback?
those are his mods... that's going to net 12-15hp maybe?? you're not going to pick up 6 tenths off of 12-15hp..
Steeda 4.6L Underdrive Pulleys, JLT CAI, SLP X-Pipe with cats and an SLP Loudmouth Catback?
those are his mods... that's going to net 12-15hp maybe?? you're not going to pick up 6 tenths off of 12-15hp..
ORIGINAL: SXGT
id say you run 14.9 stock and run 14.4 - 14.3 after mods
my 60' was 2.3? with 215/60s and auto tarnny
id say you run 14.9 stock and run 14.4 - 14.3 after mods
my 60' was 2.3? with 215/60s and auto tarnny
05-10-2006, 02:43 AM
#13
6th Gear Member
Join Date: Dec 2005
Location: Florida
Posts: 5,893
RE: These mods + 1/4 = ETA of??
Not on those engines... Exhaust is only adding around 3-5hp (especially since it is catted).. the UDP are barely 5-6rwhp, and the intake without a tune is good for only another handful of ponies...
No way the SN95 is going to get more response then the New Edge GT's... and that's all you really get from a New Edge as far as response from the mods.
No way the SN95 is going to get more response then the New Edge GT's... and that's all you really get from a New Edge as far as response from the mods.
05-10-2006, 02:55 AM
#17
2nd Gear Member
Join Date: Apr 2006
Location:
Posts: 479
RE: These mods + 1/4 = ETA of??
I can't stand it when people tell me they have 350hp, they've never had the car dynoed, but they started with 280 and all their bolt ons took them up to 350... Retards... Don't believe the writing on the box, or the commercial...
05-10-2006, 02:57 AM
#18
4th Gear Member
Join Date: May 2005
Location: New York
Posts: 1,648
RE: These mods + 1/4 = ETA of??
ORIGINAL: xxkazp3rxx
both parts of the exhaust is good for a combined 5rwhp (midpipe and catback).. if your lucky... good luck if you really expect that.
both parts of the exhaust is good for a combined 5rwhp (midpipe and catback).. if your lucky... good luck if you really expect that.
05-10-2006, 02:58 AM
#19
6th Gear Member
Join Date: Dec 2005
Location: Florida
Posts: 5,893
RE: These mods + 1/4 = ETA of??
a catted mid pipe w/a catback exhaust w/o headers won't net you more then 5rwhp on a non pi stang... Sorry. Like blacknotch said - don't believe the box... and im sure you have!
Hell on a new edge gt w/o headers, you're only gaining about 7rwhp on a O/R exhaust w/catback...
Hell on a new edge gt w/o headers, you're only gaining about 7rwhp on a O/R exhaust w/catback...
