Mark11

Ive done some research with no luck, so I was hoping someone on here could help me... Ive been looking for somewere to get lowering springs with the stock spring rate as to not mess up the weight transfer on a drag launch. I would prefer not to have to spend money on control arms and stabalizers to correct the problem with extra stiff springs. Ive seen some on upr's site but not for the 99 up cobras with the irs (i drive an 01). If any one could help me Ive kinda been beatin my head against the wall with this lately. Im not looking for anything drastic either just like a 1/2 inch to an inch and a 1/2 lowering to close the gaps in the wheel wells.

Mark11

would love some help guys