4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Me and a GM tech need help

Thread Tools
 
Search this Thread
 
Old 05-03-2007, 06:10 PM
  #1  
SHO NO MERCY
4th Gear Member
Thread Starter
 
SHO NO MERCY's Avatar
 
Join Date: Jun 2006
Location: Oklahoma
Posts: 1,131
Default Me and a GM tech need help

My buddy is a GM tech. He and I have been working on trying to figure out this problem.

I bought the car in my sig about 5 months ago. When I bought the car it was hard to put into gear and still is. 1st gear I sometimes have to reclutch and force it in. 2nd, 3rd, 4th, and 5th snag a bit. Reverse is just as hard as 1st. He doesn't have alot of time for side jobs right now, but we checked to see if the clutch cable was stretched. We tested it and this was not the case. We took out the short-throw and tried to install my friends stock '03 shifter into my '01. Unfortunately it didn't fit so we don't know if that's what's causing the problem.

There is a performance clutch installed. I'm unsure of what kind. I can see it's orange and that's about it. The guy I bought the car from works on boats and says he installed it himself. I know it's tough to tell what it could be, but was hoping someone might have ran into the same problem as I. Any help would be greatly appreciated. Thanks in advance.
SHO NO MERCY is offline  
Old 05-03-2007, 08:18 PM
  #2  
SHO NO MERCY
4th Gear Member
Thread Starter
 
SHO NO MERCY's Avatar
 
Join Date: Jun 2006
Location: Oklahoma
Posts: 1,131
Default RE: Me and a GM tech need help

bump....any ideas?
SHO NO MERCY is offline  
Old 05-03-2007, 09:38 PM
  #3  
Sap
4th Gear Member
 
Sap's Avatar
 
Join Date: Aug 2005
Location:
Posts: 1,181
Default RE: Me and a GM tech need help

Sounds like the syncros are worn out
Sap is offline  
Old 05-04-2007, 10:31 AM
  #4  
OzzDOA
3rd Gear Member
 
OzzDOA's Avatar
 
Join Date: Mar 2007
Location: Philly
Posts: 821
Default RE: Me and a GM tech need help

Shift through the gears with the engine off and see if its easier. If the shifts are smoothe while the car is just sitting but are difficult when running its the synchros.
OzzDOA is offline  
Old 05-04-2007, 06:57 PM
  #5  
ridedk4us
1st Gear Member
 
ridedk4us's Avatar
 
Join Date: Apr 2007
Location:
Posts: 78
Default RE: Me and a GM tech need help

I agree with the other guys that its probably your synchros
ridedk4us is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
HRnB
GT350 S550 Tech
10
12-18-2015 09:35 AM
Pyrate Dave
5.0L (1979-1995) Mustang
8
09-10-2015 07:30 PM
YoungStangsMan
5.0L (1979-1995) Mustang
15
09-05-2015 07:01 PM
CarrieS
5.0L (1979-1995) Mustang
6
09-01-2015 01:00 PM



Quick Reply: Me and a GM tech need help



All times are GMT -5. The time now is 11:32 PM.