Help with car will not start and blows fuse...
#11
Sorry it's a late response but I did end up finding my problem it end up being my engine harness had fallen and was in between the firewall and egr tube so it melt some of the wires "causing the maxi fuse to blow just pulled wire harness apart and rewired the bad section of wires...
#12
Sorry it's a late response but I did end up finding my problem it end up being my engine harness had fallen and was in between the firewall and egr tube so it melt some of the wires "causing the maxi fuse to blow just pulled wire harness apart and rewired the bad section of wires...
#13
here i am back 2 years later having this issue again cut open my harness to check my wires they all seem fine however even with the fuel pump disconnected it seems to have a load on it blowing fuses as soon as i turn key...leaving work yesterday it just shut off. sure enough blew that 20 maxi...taking this gremlin to the shop tomorrow.
Thread
Thread Starter
Forum
Replies
Last Post
SANDY21
V6 (1994-2004) Mustangs
3
08-17-2015 02:41 PM
92 5.0stang
5.0L (1979-1995) Mustang
4
08-13-2015 06:46 AM
Milan Dragway
Members Rides and Car Show Section
0
08-12-2015 03:43 PM