coil over lowering question with 12" springs
#1
coil over lowering question with 12" springs
Hey
Recently installed coilover kit with hypercoil springs 12"-200.
I originally adjusted the springs to a set height then lowered the car. I was a bit high so I turned the adjustment in about another 5/8" on both sides and lowered the car again and moved it around to let the suspension settle, even after adjusting the height remains the same. Now I'm nearing the top of the threaded sleeve probably another 1.5"-2" to go, is this normal or are the springs still settling?
thanks in advance.
Recently installed coilover kit with hypercoil springs 12"-200.
I originally adjusted the springs to a set height then lowered the car. I was a bit high so I turned the adjustment in about another 5/8" on both sides and lowered the car again and moved it around to let the suspension settle, even after adjusting the height remains the same. Now I'm nearing the top of the threaded sleeve probably another 1.5"-2" to go, is this normal or are the springs still settling?
thanks in advance.
Thread
Thread Starter
Forum
Replies
Last Post