Deal or No Deal on a Short Block
#1
Deal or No Deal on a Short Block
The connecting rods can be viewed at www.modmaxracing.com. They are the H-beam with the upgraded ARP bolts.
The pistons are PROBE and the part# is 1302-11884-020. They are forged aluminum with a dish of 4.5cc.
I have rings and bearings for these pistons, rods and crank shaft.
The block is an aluminum DOHC with the 4/6 bold main caps has been bored to fit these .020 oversized pistons. The block was line bored using a deck plate which is an additional expense but the best way to do it.
The crankshaft is a steel 8 bolt that has been magnafluxed and polished.
All the above will be sold for $2000 firm.
Thats the Email this guy Just sent my on thes Short block I am looking at.
The pistons are PROBE and the part# is 1302-11884-020. They are forged aluminum with a dish of 4.5cc.
I have rings and bearings for these pistons, rods and crank shaft.
The block is an aluminum DOHC with the 4/6 bold main caps has been bored to fit these .020 oversized pistons. The block was line bored using a deck plate which is an additional expense but the best way to do it.
The crankshaft is a steel 8 bolt that has been magnafluxed and polished.
All the above will be sold for $2000 firm.
Thats the Email this guy Just sent my on thes Short block I am looking at.
Thread
Thread Starter
Forum
Replies
Last Post
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM